User Manual

Canopy 900 MHz AP and SM User Guide
Issue 1, Draft 1 June, 2004 Page 6 of 16
1 Introduction
This guide is designed for operators already familiar with the Canopy system who only want the “delta” or
“difference” information for the Canopy 900 MHz Access Point and Subscriber Module. The information
in this guide will be included in appropriate sections of the Canopy documentation set.
• If you are familiar with the Canopy system, want to know what is new with the 900 MHz modules,
and don’t want to search through the general Canopy manuals, this guide is for you.
• If you are new to the Canopy system or need information across all the products and frequency
bands in the Canopy family, you should use the general Canopy manuals, not this “differences” user
guide.
To ensure you have the latest user information, check the manuals section of the Canopy web site at
http://motorola.canopywireless.com/support_library.php#manual-en.
The following abbreviations are used throughout these notes:
BH
Backhaul Module, either timing master or timing slave
BHM
Backhaul Module – timing master
BHS
Backhaul Module – timing slave
AP
Access Point Module
SM
Subscriber Module
1.1 Document Change History
Issue 1 Draft 1
• Succeeds Beta Issue 4
• Deleted information on integrated antenna. Information
will be included in a future issue (Issue 2 or beyond)
after FCC approval of the integrated antenna
• Added exposure information and recommended
distance
• Emphasized requirement that external antennas be
professionally installed
1.2 Feedback on Documentation
We welcome your feedback on Canopy documentation. Comments on structure, content, accuracy,
completeness, or any other area are appreciated. Please send your feedback to technical-
[e-mail].