User's Manual

Backhaul User Manual Draft for Regulatory Review
Pa
g
e 11 of 55
Module Description
The base cover of your Canopy Backhaul is easily removed by depressing the release lever on the
back of the cover.
Eth erne t
Cable
Base Cover
Rel e ase
Lever
Base Cover
FIGURE 1
Remove the base cover as shown in FIGURE 1 to access the Ethernet connection and the
Connection LED alignment indicators.
♦ The RJ-45 connector is used to attach the Ethernet cable
♦ The RJ-11 connector is used to attach the GPS sync cable
♦ The LED’s indicate system status and are used for alignment.
Etherne t
Cabl e
Canopy B
H
RJ 4 5
Conne c t or
Conne c tion
LE D s
Base Cover
RJ 1 1
Conne c t or
FIGURE 2
The diagnostic LEDs report information about the current status of the access point module. The
following descriptions explain the function of each LED.
Operational Mode