User's Manual

SPECIFICATIONS
Frequency Band Ranges 2.4 Modules: ISM 2.4 to 2.4835 GHz
5.2 Modules: U-NII: 5.25 to 5.35 GHz
5.7 Modules: ISM: 5.725 to 5.850 GHz
Access Method TDD/TDMA
Signaling Rate 10 Mbps
Modulation Type High Index 2-level Frequency Shift Keying (FSK)
(Optimized for interference rejection)
Carrier to Interference (C/I) 3 dB nominal
Receiver Sensitivity -83 dBm at 10
-4
BER
Operating Range
(All Weather)
Module Type Reflector on SM? Typical Range
5.2 AP No - Not allowed
on regular 5.2 SM
in US or Canada
2 miles (3.2 km)
5.2 AP Yes, on “Low
Power” SM
2 miles (3.2 km)
5.7 AP No 2 miles (3.2 km)
5.7 AP Yes 10 miles (16 km)
2.4 AP No 5 miles (8 km)
2.4 AP Yes 15 miles (24 km)
Transmitter Power Meets FCC U-NII/ISM and IC LELAN ERP Limit
DC Power measured at DC
converter
0.3A @ 24 VDC (7.2 watts) typical
Interface 10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
Protocols Used by Canopy IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMPv2c, DES
Protocols Supported by
Canopy
Switched Layer 2 Transport with support for all common Ethernet
protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Software Upgrade Path Remotely downloaded into FLASH via RF link
Network Management HTTP, TELNET, FTP, SNMP
Temperature
-40°C to +55°C (-40°F to +131°F)
Dimensions 11.75” H x 3.4” W x 3.4” D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Weight 1 lb. (.45kg)