User's Manual

time.
If a Canopy module is placed into Alignment Mode it will automatically drop into Operational
Mode after 15 minutes
.
BER Display
Bit Error Rate (BER) Display is utilized by the operator to measure the amount bit errors present in
a link. BER Display will only work if the access point module is configured to send the BER stream.
**IMPORTANT** If one access point module in a cluster is set to send a BER stream then all
other access point modules in that cluster must be configured in the same fashion.
The field, Measured Bit Error Rate, will display a value that corresponds to the BER at the moment
of web browser refresh. An acceptable link will have a BER that is less than 10
-4
. If the BER is
greater than 10
-4
then the operator needs to evaluate the subscriber and/or access point module
installation for potential issues. To refresh the screen, click the
Refresh Display button as
appropriate or configure the web page auto-refresh option.
ACCESSORIES
The following accessories are available for use with the Canopy System. To purchase
accessories, please contact an authorized Canopy dealer, unless otherwise noted.
• Universal mounting bracket (part number SMMB-1)
• Passive reflector dishes for use with 5.7 GHz subscriber modules (part number 27RD)
• 102-132 V AC power supply with North American plug, part number ACPS110
• 100-240 V AC power supply with North American, UK, and Euro plugs, part number
ACPSSW-02
• Cable assemblies for the Canopy System can be ordered from Best-Tronics Manufacturing
Inc. by going to their website at http://www.best-tronics.com/motorola. Due to the RF
environment Canopy Backhauls, Access Points, and Cluster Management Modules often
operate in, it is strongly recommended to use shielded cable for infrastructure cabling