User's Manual

SPECIFICATIONS
Operating Frequency Range U-NII: 5.25 to 5.35 GHz and 5.725 to 5.825 Ghz
ISM: 5.725 to 5.850 GHz
Access Method TDD/TDMA
Signaling Rate 10 Mbps or 20 Mbps
Modulation Type High Index BFSK
(Optimized for interference rejection)
Carrier to Interference (C/I)
also known as Jitter
3dB nominal
Receiver Sensitivity -83dBm 10
-4
BER
Operating Range
(All Weather)
Up to 2 miles with integrated antenna. Up to 35 miles with
installed passive reflectors.
Transmitter Power Meets FCC U-NII/ISM and IC LELAN ERP Limit
DC Power .3A @ 24 VDC (7.2 watts)
Interface 10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
Protocols Used by Canopy IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP, DES
Protocols Supported by
Canopy
Switched Layer 2 Transport with support for all common Ethernet
protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Software Upgrade Path Remotely downloaded into FLASH via RF link
Network Management HTTP, TELNET, FTP, SNMP
Temperature
-40°C to +55°C (-40ºF - +131ºF)
Dimensions 11.75” H x 3.4” W x 3.4” D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Weight
with passive reflector
1 lb. (.45kg)
6.5 lbs. (3 kg)