User's Manual

68P80801H45-1 1/20/2002 55
EBTS System Manual - Vol 2 Troubleshooting
QUAD Base Radio Station Verification Procedures
3.4 Set the transmit power to 40 watts and key the BR.
4. After keying the Base Radio, verify the forward and reflected powers of the
station along with the station VSWR with the parameters listed in Table 2.
NOTE
The reported value for forward power are not
indicative of Base Radio performance. This value is
reported from the internal wattmeter. These limits are
only for verification of operation and are not
representative of true operational power of the
transmitter.
4.1 At the field > prompt, type:
This command returns all active alarms of the Base Radio.
Table 20 QUAD BR Transmitter Parameters
Parameter Value or Range
Forward Power Greater than 36 Watts
Reflected Power Less than 2.0 Watts
VSWR Less than 1.6:1
field> ptm -otx_all -mdnlk_framed
field> power -otxch1 -p40
field> power -otx_all