User's Manual

48 68P80801H45-1 1/20/2002
Troubleshooting EBTS System Manual - Vol 2
QUAD Channel Base Radio/Base Radio FRU Replacement Procedures
QUAD BR Power Amplifier (PA) Fan FRU Replacement
Perform the following steps to replace the Power Amplifier (PA) fans.
1. Remove the Power Amplifier from the Base Radio per FRU Replacement
Procedure.
2. Disconnect fan power cable from PA housing.
3. Remove front panel from fan assembly.
4. Remove fan assembly from PA chassis.
NOTE
To install the new fan kit, reverse above procedure.