User's Manual

68P80801H45-1 1/20/2002 17
EBTS System Manual - Vol 2 Base Radio Controllers
900 MHz QUAD Channel Base Radio Controller
Controls
Table 8 lists the controls and descriptions.
STATUS Connector
Table 9 the pin-outs for the STATUS connector.
REF Red Controller
Station
Reference
Solid (on) FRU failure indication - Controller
Station Reference has a major alarm,
and is out of service
Flashing (on) BRC has a minor alarm, and may be
operating in a marginal region
Off BRC is operating normally (no alarms)
RX1
RX2
RX3
RX4
Red Receiver #1,
#2, #3, or #4
Solid (on) FRU failure indication - Receiver (#1,
#2, #3 or #4) has a major alarm, and is
out of service
Flashing (on) Receiver (#1, #2, #3 or #4) has a minor
alarm, and may be operating at
reduced performance
Off Receiver (#1, #2, #3 or #4) is operating
normally (no alarms)
TX1 Green BR Solid (on) Station Transmit Carrier #1 is keyed
Flashing (on) Station Transmit Carrier #1 is not
keyed
Off Station is out of service, or power is
removed
TX2 Green BR Solid (on) Station Transmit Carrier #2 is keyed
Flashing (on) Station Transmit Carrier #2 is not
keyed
Off Station is out of service, or power is
removed
TX3 Green BR Solid (on) Station Transmit Carrier #3 is keyed
Flashing (on) Station Transmit Carrier #3 is not
keyed
Off Station is out of service, or power is
removed
TX4 Green BR Solid (on) Station Transmit Carrier #4 is keyed
Flashing (on) Station Transmit Carrier #4 is not
keyed
Off Station is out of service, or power is
removed
Table 7
900 MHz QUAD Channel BR Controller Indicators (Continued)
LED Color Module
Monitored
Condition Indications