User's Manual

8 68P80801E35-B 5/1/2002
Base Radio EBTS System Manual - Vol 2
Generation 2 Single Channel 800 MHz Base Radio Overview
Gen 2 Single Channel BR Transmit Specifications
The Generation 2 BR transmit specifications are listed in Table 4.
Gen 2 Single Channel BR Receive Specifications
The receive specifications are listed in Table 5.
Table 4 Transmit Specifications
Specification Value or Range
Average Power Output:
(800 MHz) 40 W PA
(800 MHz) 70 W PA
5 - 40 W
5- 70 W
Transmit Bit Error Rate (BER) 0.01%
Occupied Bandwidth 18.5 kHz
Frequency Stability * 1.5 ppm
RF Input Impedance 50 Ω (nom.)
FCC Designation (FCC Rule Part 90):
(800 MHz Legacy) 40 W PA
(800 MHz Legacy) 70 W PA
(800 MHz Low Noise Exciter) 40 W PA
(800 MHz Low Noise Exciter) 70 W PA
ABZ89FC5772
ABZ89FC5763
ABZ89FC5772-A
ABZ89FC5763-A
* Stability without site reference connected to station.
Table 5 Receive Specifications
Specification Value or Range
Static Sensitivity †:
800 MHz BR -108 dBm (BER = 8%)
BER Floor (BER = 0.01%) ≥ -80 dBm
IF Frequencies
1st IF (All bands):
2nd IF:
800MHz
73.35 MHz (1st IF)
450 kHz (2nd IF)
Frequency Stability * 1.5 ppm
RF Input Impedance 50 Ω (nom.)
FCC Designation (FCC Rule Part 15):
800 MHz BR ABZ89FR5762
† Measurement referenced from single receiver input port of BR.
* Stability without site reference connected to station.