Instruction Manual

Table Of Contents
6 From the menu, select ToolsOS Inventory.
A list of the OS images appears.
7 Verify OS images loaded on the UNC server appear in the OS inventory.
NOTICE: These images were automatically created during the Loading Device OS
Images to the UNC on page
127 procedure.
8 Under Networks in the navigation pane, select one or more devices from the same device class
by right-clicking the selections.
9 From the menu, select Update OS Image.
10 From the Select OS Image window, select Software Image. Click Next.
11 From the Update OS Image window, select each device that appears in the Selected Devices
section.
This action associates a version to a device instance.
NOTICE: In most cases, the “summary of device partitions” is already set up and the
values in step 11 through step 14 must be verified.
12 Select nvm partition from the Manage Partition for Device
section.
NOTICE: Selecting nvm partition defines where the OS image is transferred and is the
only choice for the device.
13 From the Selected Image section, select the image for this device.
NOTICE: Ignore the Install
and Copy check boxes.
The Image Info tab is populated and informs the application which image to use.
14 Click Add.
The Summary of Device Partitions for Device populates and confirms the proper setup.
15 Select the Device Options section, Software Operations, then choose transfer, install, or
both.
These selections indicate which operations occur when the job is executed.
NOTICE: If transfer is chosen, select the install option later to complete the installation.
If both is chosen, the software is transferred and installed. There are up to two resets of
the device during installation.
16 Click Schedule.
17 From the Schedule Push Job window, configure the schedule information. Click Approve and
Submit.
The job is approved and can be viewed in the Schedule Manager
window.
NOTICE: If only Submit is chosen, the job must be approved later.
18 Verify the job status by pressing
F7 (Schedule Manager).
The Schedule Manager window appears in the UNC with the discovery jobs.
MN003286A01-H
Chapter 3: GTR 8000 Base Radio Installation
131