User's Manual

xxx
8/30/0268P81095E05-C
PERFORMANCE SPECIFICATIONS (Cont'd)
Transmitter
Power Output
VHF UHF 800 900
6-25W 5-25W 5-20W 25-100W
25-125W 25-110W 20-100W
Electronic Bandwidth Full sub-band
Intermodulation Attenuation
VHF: 20 dB (single circulator; standard on all PAs)
65 dB (triple circulator - requires triple circulator option)
UHF: 50 dB (single circulator; standard on all PAs)
800: 50 dB (single circulator; standard on all PAs)
900: 20 dB (single circulator; standard on all PAs)
70 dB (triple circulator - requires triple circulator option)
SpuriousandHarmonicEmissionsAttenuation 90 dB
Deviation
VHF, UHF, and 800 900
±5 kHz (25 kHz) ±2.5 kHz
±2.5 kHz (12.5 kHz)
Audio Sensitivity -35 dBm to 0 dBm (variable)
Audio Response (Analog Mode)
+1, -3 dB from 6 dB per octave pre-emphasis; 300-3000 Hz referenced to
1000 Hz at line input
Audio Distortion Less than 2% @ 1000 Hz @ 60% rated system deviation
FMHum andNoise (300to 3000Hz bandwidth)
45 dB nominal (12.5 kHz)
50 dB nominal (25/30 kHz)
Frequency Stability VHF, UHF, 800: 1 ppm 900: 0.1ppm
RF Output Impedance
50 W
VHF
25W: ABZ89FC3774 (FCC Rule Parts 22, 74, 80, 90)
125W: ABZ89FC3773 (FCC Rule Parts 22, 74, 80, 90)
FCC Designation
UHF
25W/R1-2:ABZ89FC4797(FCCRuleParts22,74,90)
110W/R0:ABZ89FC4798ĆD(FCCRulePart90)
110W/R1-3:ABZ89FC4798(FCCRuleParts22,90)
100W/R4: ABZ89FC4798 (FCC Rule Part 74)
800
20W: ABZ89FC5775 (FCC Rule Parts 22, 90)
100W: ABZ89FC5776 (FCC Rule Parts 22, 90)
FCC Designation
900
100W: ABZ89FC5767 (FCC Rule Part 90)
Measurement Methods per TIA/EIA-603
Specifications subject to change without notice