User's Manual

10-6 MTR2000 MOTOTRBO Digital Upgrade: New Connections
• Ethernet to support the following MOTOTRBO features
- IP Site Connect
-RDAC
- Capacity Plus
- Connect Plus
Note
1. It is not recommended to perform a digital upgrade and use the upgraded base station/
repeater in analog mode as certain analog functionality will be lost. Refer to Product
Planner for details.
2. 14.2 VDC power (Pin 20) and GPIO_10 (Pin 5) are not supported on an upgraded
MTR2000 J7 backplane connector. If 12 VDC power is required on an upgraded
MTR2000, then it must be obtained from Pin32 of connector J5. Alternately the MTR
2000 backplane can be replaced with DLN6721 for full support of pin 5 and pin 20.
APPLICANT: MOTOROLA
EQUIPMENT TYPE: ABZ89FC3797
EXHIBIT D1-4