User's Manual

D R A F T – 9/10/2001
Alignment
Normal Operating Display
Operating Mode This will read SM is in Operating Mode or SM is in
Alignment Mode as an indication of the currently selected
mode.
Enable Alignment
Mode ON
Click this button to put the radio into Alignment Mode, or to
update the Alignment Mode bar graph (should it not
automatically refresh every second).
Disable Alignment
Mode OFF
Click this button to return the radio back to normal operating
mode when alignment is satisfactory (aim the radio for
maximum number of LEDs on the bar graph)
LED Bar Graph Reflects the received signal strength from the service
provider’s access point. Proper alignment is when the bar
graph shows the maximum number of lit LEDs. While in this
mode, the LED bar graph can be observed on the radio itself,
such that it is unnecessary to have visibility of the computer
screen while orienting the WHiSP radio.