User's Manual
11/15/0068P80801D55-O
The following lists available options that may be selected in addition to the standard model
and options (described in Steps 1 thru 6).
7
AVAILABLE HARDWARE OPTIONS FOR STATION with HIGH POWER BOOSTER
Option
Category
Option and Complement
Power
Supply
AC Input Supplies
X30BM Booster Dual Power Supply Option (with Batt Chrgr)
ąCPN1050D 265W Power Supply (AC input; w/ battery charger)
ąCPN1071A625W Power Supply (AC input; w/ batt chrg); Qty 2
ąCLN7261A Ferrite RFI Suppressor
ąCLN7619A Dual Power Supply Chassis Hardware
ąCPN6086AFront Panel, Dummy Charger Connector
ąCLN7499A Battery Control Board
ąTKN8786A Battery Temperature Sensor
ąTRN5155A 10' Extension Cable w/connectors and fuse block
ąCHN6100A AntiĆVibration/EFI Screws (2)
Wireline
Interface
Module
X84AA Omit Standard Wireline Interface Module (WIM)
X144AA Add 8-Wire Wireline Interface Module (WIM)
CLN6956A 8-Wire Wireline Interface Board (WIB)
TKN8731A WIM Cable Kit
CLN6816A RFI Suppressor
Antenna
Relay
X371AA Add Antenna Relay
TRN7664A Antenna Relay, Cables, and Mounting Hardware
Modem
X437AA Add Modem
TRN7668A Modem Card
Circulator
X676AB Add Triple Circulator (UHF, R1 and R2)
TLE9120A Dual Circulator
TLN3391A 50 Ohm Load with Heat Sink
TLE9140A Low Pass Filter
TRN7796A Fan, Peripheral Tray
Low Pass
Filter
X154AA Add Triple Circulator (UHF, R1 and R2)
TLE9120A Dual Circulator
TLN3391A 50 Ohm Load with Heat Sink
TLE9140A Low Pass Filter
TRN7796A Fan, Peripheral Tray
UHSO
X873AA Add Internal Ultra High Stability Oscillator
CLN7012A BNC Terminator
CHN6100A AntiĆVibration/EFI Screws (2)
CLN1477A UHSO Module
ąTTN5070CąUHSO Board
ąTTN5071AąUHSO Housing and Front Panel
ąTTN5072AąUHSO 5 PPB Ovenized Element
Peripheral
Tray
X696AA Add Peripheral Tray
TRN7751A Peripheral Shelf
Miscellaneous
HSN1000 External Speaker
TRN7738A External Speaker Hardware (bracket and cable)
HMN1001A Microphone