User's Manual

70
Utility Software
Cancel Registration
The registered phone numbers are unregistered.
yPull down menuySelect an option from the followingsy
Click [設定送信 (Send Settings)] (b)yClick [OK]
• Phone numbers with no Caller ID can also be registered
to reject.
• International phone numbers may not be registered.
• If 30 numbers are already registered, delete the oldest
and register a new one following the message.
• You cannot check or inquire about numbers registered in
Nuisance call block. It is recommended that you write
them down.
Remote Control
Setting Remote Control
You can set to operate the Voice Mail or Call
Forwarding Service from a public phone other
than the FOMA terminal.
• When is displayed, operation is not possible.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y“遠
隔アクセス(Remote Control)” tab
•[設定確認 (Check Settings)] : The setting of “遠隔アク
セス制御 (Remote Control)” can be checked.
b
Perform the following steps
Remote Control
yPull down menuySelect an option from the followingsy
Click [設定送信 (Send Setting)]yClick[OK]
Roaming Guidance
Setting Roaming Guidance
A message informing a caller that you are
overseas can be set to play to a anyone
attempting to call you while you are overseas.
• When is displayed, operation is not possible.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y
“ローミングガイダンス (Roaming
Guidance)” tab
•[設定確認 (Check Settings)] : The setting of “ローミン
グガイダンス設定 (Roaming Guidance Settings)” can
be checked.
b
Perform the following steps
Roaming Guidance Settings
yPull down menuySelect an option from the followingy
Click [設定送信 (Send Settings)]
全件解除 (Cancel All) : All registered phone numbers are
deleted.
1件削除 (Delete One) : The last saved phone number is
deleted.
Remote Control Setting Screen
開始 (Activate) : Remote Control Service starts.
停止 (Deactivate) : Remote Control Service stops.
有り (Yes)
無し (No)
: Roaming Guidance is played.
: Roaming Guidance is not played.
Roaming Guidance Settings Screen
Network Service Settings