User's Manual

3
55
erawtfoS ytilitU
Launching/Exiting
Launching/Exiting the FOMA
M2501 HIGH-SPEED Utility
Launching
• Log into a user account with the Administrator or PC
supervisor privileges.
a
Double click the “M2501 HIGH-
SPEED Utility” icon on the
Desktop
The Main screen (P54) opens.
■ If the icon is not displayed
Click “スタート (Start)” y “すべてのプログラ
ム (All Programs)” / “プログラム (Programs)” y
“M2501 HIGH-SPEED” y “M2501 HIGH-
SPEED Utility”
Exiting
a
Click (Orange) on the Main screen
(P54)
The exiting confirmation screen appears.
b
Click [OK]
• You cannot exit the utility under the following
circumstances : (checking the specifications)
- While dialing or receiving/performing a call
- While the Redial/Received Calls/Phonebook screen
is open
Phonebook
Using Phonebook
Adding
Saving Entries in Phonebook
a
Click (電話帳 (Phonebook)) on the
Main screen (P54)
b
Click [追加 (Add)]
c
Perform the following steps
Name
Enter using Kanji, Hiragana, Katakana, alphanumeric or
symbols.
yEnter a name
• Enter characters using the keyboard of the PC.
• Up to 16 double-byte or 32 single-byte characters can be
entered.
• An entry cannot be saved to the Phonebook until this field is
filled in.
Reading
Enter using double-byte katakana, single-byte alphanumeric, or
single-byte symbols.
yEnter a reading
• Enter characters using the keyboard of the PC.
• A reading is entered automatically when “名前 (Name)” is
entered.
• Up to 16 double-byte or 32 single-byte characters can be
entered.
Phone number
Enter using single-byte alphanumeric characters.
yEnter a phone number
• Enter characters using the keyboard of the PC.
• Up to 26 characters from 0 to 9 (including #, *, and +) and up
to five - (hyphens) can be entered.
d
Click [登録 (Add)]
• To save Phonebook to the PC after adding a contact,
click [更新 (Refresh)] → [OK] on the Contacts screen.
Security Settings
Setting UIM PIN
You can set the PIN1 code for the UIM.
• Insert the FOMA terminal into the PC card slot before
performing these steps.
• While the Security Settings screen is displayed, no
operations can be performed from the Main screen. If a call
arrives during the operation, the call can be answered after
[閉じる (Close)] is clicked, however, the options being set
will be canceled.
Entering a PIN1 Code/Changing the PIN1 Code
You can require the PIN1 code entry each time
the M2501 HIGH-SPEED Utility is launched. You
can also change the PIN1 code.
Phonebook Screen
Default
起動時PINコード照合 (PIN Code Verification at
Start-up): 無 (No)
NI
P
MIU/koo
benohP/g
nitix
E/gnihcnuaL
Default settings
An item name
actually shown
on the screen.
Some functions
cannot be
performed
depending on
operations.
Chapter index
tab with
function name
or title.
* The above page is an example.
* Screen images and illustrations contained in this manual are for
reference only. They may differ from those seen for the actual
product.
Page
A section title
Operation steps
Useful
information or
suggestions
relating to an
operation
Key screen for a
function. This is
an image of a
screen seen on
the PC.
Numbers,
settings or
characters
entered are for
reference only.