User's Manual

46
Setting Up
ATD Start packet communication or
64K data communication.
Packet communication :
ATD＊99＊＊＊<cid>#
<cid> X to X : +CGDCONT
64K data communication :
ATD <phone number>
Packet communication :
ATD＊99＊＊＊1#
CONNECT
64K data
communication : ATD
XXXXXXXXXX
CONNECT
ATE <n>
[&F] [&W]
Set whether to echo back the
text sent from a PC.
n=0 : Not to echo back.
n=1 (default) : Echo back.
ATE1
OK
ATH <n> Disconnect packet
communication or 64K data
communication.
n=0 : Disconnect line (can be
skipped).
(In communication)
+++
ATH
OK
ATI <n> Display the confirmation
code.
n=0 : Display “NTT
DoCoMo”.
n=1 : Display the name of
the FOMA terminal (same as
+GMN).
n=2 : Display the FOMA
terminal version (same as
+GMR).
n=3 : Display “OK”.
n=4 : Display the details of a
function, that can be
controlled by DTE, in 0 - 15.
→P48
ATI0
NTT DoCoMo
OK
ATM Set the monitor speaker mode.
(checking the specifications)
(checking the specifications) ATMO
OK
ATO Switch from On-line command
mode to Off-line command
mode during communication.
ー
ATO
CONNECT
ATQ <n>
[&F] [&W]
Set whether to display the result
code on a PC.
n=0 (default) : Show result
codes.
n=1 : Hide result codes.
ATQ0
OK
ATQ1
(OK is not displayed)
ATS0=<n>
[&F] [&W]
[?]
Set number of rings until FOMA
terminal receives connection
automatically.
n=0 (default) : No auto
receive is performed.
n=1 to 255 : Number of rings.
ATS0=0
OK
ATS2=<n>
[&F] [?]
Set the escape character. n=0 to 127 (default n=43) :
If set to n=127, the escape
process becomes invalid.
ATS2=43
OK
ATS3=<n>
[&F] [?]
Set the return character (CR) to
recognize the end of AT
command text string.
n=13 (default) : only n=13
can be specified.
ATS3=13
OK
ATS4=<n>
[&F] [?]
Set the line feed character. It is
positioned next to the return
character (CR) if displaying the
result code in alphanumeric
characters.
Only n=10 (default) can be
specified.
ATS4=10
OK
ATS5=<n>
[&F] [?]
Set the back space character
(BS) to delete the last character
in the input buffer while AT
commands are entered.
Only n=8 (default) can be
specified.
ATS5=8
OK
AT Command Overview Parameters/Description Command Examples
AT Command List