User's Manual

45
Setting Up
AT+CREG=<n>
[&F] [&W]
[?] [=?]
Set whether to show Out of
service area or in the service
area.
n=0 (default) : Hide
n=1 : Show
Enter “AT+CREG?” then it is
shown in the format of
“+CERG : <n>, <start>”
start=0 : Out of the service
area of 64K data.
communication/video calls
start=1 : Inside of the service
area of 64K data.
communication/video calls
start=4 : Unknown.
start=5 : Inside of the service
area of 64K data
communication/video calls
(while roaming).
AT+CREG=1
OK
AT+GMI Display the manufacturer of the
FOMA terminal.
ー
AT+GMI
+GMI :
“Motorola CE, Copyright
2006”
OK (checking the
specifications)
AT+GMM Display the name of the FOMA
terminal.
ー
AT+GMM
+GMM :
“GSM900”,“GSM1800”,
“GSM1900”,
“WCDMA”,“MODEL=
M2501 HIGH-SPEED”
OK (checking the
specifications)
AT+GMR Display FOMA terminal’s
version.
ー
AT+GMR
+GMR :
“M2501 HIGH-SPEED_
12_34.56.78”
OK
AT+IFC=<n>,
<m>
[&F] [&W]
[?] [=?]
Set the local flow control method
between the PC and the FOMA
terminal.
n : DCE by DTE control
n=0 : No flow control.
n=1 : XON/XOFF control.
n=2 (default) : RS/CS (RTS/
CTS) flow control.
m : DTE by DCE control.
m=0 : No flow control.
m=1 : XON/XOFF control.
m=2 (default) : RS/CS (RTS/
CTS) flow control.
AT+IFC=2,2
OK
AT+WS46=<n>
[&F] [&W]
[?] [=?]
Set the wireless network to be
used by the FOMA terminal
when dialing.
n=12 : GSM
n=22 : 3G (WCDMA)
n=25 : Auto switch
AT+WS46?
25
OK
ATA The FOMA terminal processes
the incoming according to the
receiving mode.
ー
RING
ATA
CONNECT
A/ Retry a command just before
performing.
ー
A/
OK
AT Command Overview Parameters/Description Command Examples
AT Command List
Continued on the next page