User's Manual

4 Start
Start
Assemble & charge battery
Put the nano SIM in, charge up, and power on.
Note: Your nano SIM card may already be in your smartphone.
If it is, just charge up and power on.
Caution: Before using your smartphone, please read the
safety, regulatory, and legal information provided with your
product.
1
Pull out the SIM tray
with your ngernail.
Push the tray back
into your smartphone.
Clip the nano SIM
into the tray.
SIM
3
Turn on.
Power
Key
2
Charge fully.
3 H
Tips & t ricks
•SIM tray: The SIM tray is on the back side of the volume
keys. Slide your fingernail under the volume keys on the side
of your smartphone, and pull out to open it. Put your nano
SIM into the tray. Push the tray back into the smartphone.
•Power/Sleep key: To make the screen sleep or wake up,
press the Power key. To turn your smartphone on or off,
press and hold the Power key.
• Notification Light: The notification light blinks when you
have a new message or notification, and lights up when you
start charging a dead battery.
• Battery: Squeeze every bit of juice out of your battery. See
“Battery life” on page 5.
Warning: Don't try to remove or replace the battery
yourself—doing so may damage the battery and could cause
burning and injury. If your smartphone becomes unresponsive,
try a reboot—press and hold both the Power and the Volume
Down keys for about 10 seconds.
2013.06.05
FCC DRAFT