User guide

PRODUCT INSTALLATION

16 eng

36 VOLT BATTERY CONNECTION

a - Power cable

b - 50 amp manual reset circuit breaker

c - Jumper wire (not supplied)

d - Common ground

1. Install a 50 amp manual reset circuit breaker in line with the

positive lead.

2. Connect the red battery lead from the power cable circuit

breaker to the positive (+) post on battery C.

3. Connect the black battery lead from the power cable to the

negative (–) post on battery A.

4. Connect a jumper wire (not supplied) between the negative

(–) post on battery C to the positive (+) post on battery B.

5. Connect a second jumper wire (not supplied) between the

negative (–) post on battery B to the positive (+) post on battery

RED

BLK

GRA

Battery B

Battery C

Battery A

GRA

45996