SDS

9. Physical and chemical properties
Liquid. Clear.
Appearance
Liquid.
Physical state
Liquid.
Form
Red.
Color
Diesel Fuel odor
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-20 °F (-28.89 °C) estimated
Initial boiling point and boiling
range
347 °F (175 °C) estimated
Flash point
136.0 °F (57.8 °C) Tag Closed Cup
Evaporation rate
Not available.
Not applicable.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
0.7 % estimated
Flammability limit - upper
(%)
5 % estimated
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
0.64 hPa estimated
Vapor density
Not available.
Relative density
Not available.
Solubility(ies)
Solubility (water)
Not available.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
500 °F (260 °C) estimated
Decomposition temperature
Not available.
Viscosity
Not available.
Other information
Density
7.02 lbs/gal
Not explosive.
Explosive properties
Flammability class
Combustible II estimated
Moisture
< 0.2 %
Not oxidizing.
Oxidizing properties
Specific gravity
0.84
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Reactivity
Material is stable under normal conditions.
Chemical stability
Hazardous polymerization does not occur.
Possibility of hazardous
reactions
Avoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding the
flash point. Contact with incompatible materials.
Conditions to avoid
Strong oxidizing agents.
Incompatible materials
No hazardous decomposition products are known.
Hazardous decomposition
products
5 / 10
Material name: Motor Medic Motor Flush
MF2, MF3 Version #: 01 Issue date: 01-26-2016
SDS US