Model no. 011-1970-8 PRECISION SERIES BATTERY CHARGER s bs IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions.
headline bars 3 Model no. 011-1970-8 Questions? Contact us 1-888-942-6686 2 Introduction 4 Safety 4 Connecting Your Battery 6 Controls and Indicators 8 Charging Your Battery 9 Understanding Factors That Affect Charging Time Maintenance and Care Troubleshooting Technical Specifications warnings 3069523 This MotoMaster Eliminator product carries a five (5) year warranty against defects in workmanship and materials.
4 headline bars 5 Model no. 011-1970-8 Questions? Contact us 1-888-942-6686 • IMPORTANT SAFETY INSTRUCTIONS • • • SAFETY • • INSTRUCTIONS. Read all instructions, warnings, and cautions printed on the battery charger, battery and vehicle or equipment using battery. DO NOT expose charger to rain or snow. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
6 headline bars 7 CONNECTING YOUR BATTERY • • • • Locate charger as far away from battery as DC cables pemit. Never place charger directly above battery being charged; gases from battery will corrode and damage charger. Never allow battery acid to drip on charger when reading electrolyte specific gravity or filling battery. Do not operate charger in a closed-in area or restrict ventiation in any way. Do not set a battery on top of charger.
notes A. Charge Status Indicator 1 A NORM (14.4 V) For charging small to medium 12 V wet cell lead-acid batteries. 1 A COLD / AGM (14.8 V) C This battery charger has an easy-to-follow 4-LED charge status indicator: 25%, 50%,75%,100%. This indicator provides an estimate of the battery’s state of charge as charging progresses. During charging, the corresponding state of charge LED will be flashing. When the 100% LED lights solid (i.e.
headline bars Using Power Supply Mode In Power Supply mode, the battery charger acts as a constant-current, constant-voltage DC power supply. This feature can be used to: (1) Manually raise the voltage of a 12-volt lead-acid battery that is completely discharged UNDERSTANDING THE MULTI-STAGE CHARGING PROCESS * * UNDERSTANDING FACTORS THAT AFFECT CHARGING TIME The time it takes to fully recharge a battery depends on several factors including: 1.
13 12 • • Wipe clean cords and clamps after each use. • Store the power and output cables neatly to prevent damage. continuation tabs • • The charger housing may be cleaned using a damp cloth and mild cleaning agent. Always unplug the charger when not in use. Keep the charger stored in a cool, dry place. TROUBLESHOOTING when plugged into AC outlet. warnings TROUBLESHOOTING notes No LEDs illuminate Amber (solid) fault LED is illuminated. warnings Red (solid) fault LED is illuminated.
