User manual

36 MLC-810 TUFF VIEW LCD Monitor
Impact: No damage with a 9g steel ball dropped into the centre of the panel
from a height of 30cm.
Static Load: 5kg load over a 10mm area for 10 seconds.
Hardness: 3H pencil pressure, 1N @ 45 degrees.
Durability write test: 10,000,000 times, with a force of 250g and a stylus of 0.8mm radius.
Durability knock test: 1,000,000 times, with a force of 250g, 3Hz R8/HS60.
Touch Screen controller
Resolution: 2,048 x 2,048.
Report rate: 250 points/second maximum with USB interface.
160 points/second maximum with RS232 interface.
Response time: 20ms.
Accuracy: Maximum +/-0.5% tolerance.
Interface: USB1.1 or RS232 (EIA/TIA-232-F compatible.
Both interfaces are transient protected.
Data rate: RS232 data rate is 9,600 bps 8N1.
Touch Screen driver software
Calibration: Fast 4-point position.
Compensation: Accuracy: 9-point and 25-point linearity position.
Edge compensation.
Draw test: Position and linearity verification.
Controller setting: Support multiple controllers.
Dynamic add/remove controllers.
Change controller interface without reboot.
Languages: Supports 10 languages for Windows.
Mouse emulator: Right and left button emulation.
Click/drawing mode.
Sound notification: No sound.
Sound on touch contact.
Sound on touch release.
Double click: Configurable double click speed.
Configurable double click area.
OS support: Windows 2000, XP, Vista and Windows 7.
Windows Embedded
Windows CE.NET (4.x, 5.0). CE 6.0.
Linux (up to Kernel 2.6.x), 32-bit and 64-bit.
MS-DOS: supports display resolutions: 640x480, 800x600,
1024x768 and 1280x1024.
Mac OS 9.x and OS X (Power PC, Intel CPU).
QNX Neutrino RTOS V6.3.
COM Port Support: Supports COM1 to COM256 for Windows and Linux. COM1 to
COM8 for DOS.