User manual

User Manual Rev 1.0 27
 Press the brightness Up and Down buttons to move right and left along the Main
OSD menus. Once the desired menu is highlighted, press the Menu button again
to enter the sub-menu.
 Press the brightness Up and Down buttons to move right and left along the menu
options. Once the desired item is highlighted, press the Menu button again to
select the item.
 Press the brightness Up and Down buttons to adjust the setting up and down.
Once the desired level is reached, press the Menu button again to exit the OSD.
 To exit the OSD, select the exit item, or wait a few seconds (while not pressing
any buttons).
7.4.2. OSD top-level menus
Going from left to right, in the photograph below, the OSD menu tabs are:
 Input Selection. This allows selection between a VGA or DVI video input. The
MLC-810 is fixed to VGA.
 Brightness and Contrast.
 Colour temperature.
 Position.
 Tools.
 Exit. This exits the OSD.
Figure 8. OSD top-level menus and Video Source Selection.