Use and Care Manual

INITIALIZING SYSTEM & SETING HEIGHT
before your first use.
Press and hold the UP and DOWN arrows sim
number 38 (+/-
0.2) appears on the display. Your desk is now ready to use.
Preset Table Heights
***One USB Charging
USB Charging: 5V DC 2.4 Amp for cell phone and tablet charging only
Hold "M" and "U
P" buttons for 4 seconds to lock all buttons, the
code will be displa
yed on the control panel screen.
Hold "M" and "DOWN" bu
If the system STOPS working and shows
cool down to 25ºC this will solve the problem.
INITIALIZING SYSTEM & SETING HEIGHT
PO
S
Press and hold the UP and DOWN arrows sim
ultaneously for 6 s
econd
0.2) appears on the display. Your desk is now ready to use.
***One USB Charging
Port included***
USB Charging: 5V DC 2.4 Amp for cell phone and tablet charging only
SAFETY FEATURE
P" buttons for 4 seconds to lock all buttons, the
following
yed on the control panel screen.
Hold "M" and "DOWN" bu
ttons
for 5 seconds to unlock all buttons
If the system STOPS working and shows
“HOT” on the screen.
This mean
few minutes and let it
cool down to 25ºC this will solve the problem.
S
ITIONS
econd
s
0.2) appears on the display. Your desk is now ready to use.
USB Charging: 5V DC 2.4 Amp for cell phone and tablet charging only
following
for 5 seconds to unlock all buttons
.
This mean
s the
few minutes and let it
Page 10