User guide

Veloce 50 Operating Manual
3
2.3 MODULE FRONT PANEL
The Veloce Module front panel essentially consists of the fiber optic Transducer (sensor) Input connector
(ST type), the Analog (voltage) Output connector (BNC type), a Reset Button and two (green and red)
Status LEDs.
VELOCE-50
RESET
CHECK
READY
SENSOR
INPUT
ANALOG
OUTPUT
F I S O T E C H N O L O G I E S
Figure 1. Veloce module front panel overview
2.3.1 STATUS LED
The green LED (READY) indicates that the Veloce is currently acquiring and processing data. The red LED
(CHECK) is turned on while the reset is activated, or indicates a malfunction of the system.
2.3.2 T
RANSDUCER INPUT
The fiber optic transducer connects to the Veloce Module via the ST-type fiber optic connector. See
section 7.3 for the precautions that have to be taken when mating a transducer to the Veloce Module.