User guide

Veloce 50 Operating Manual
16
8 SPECIFICATIONS
1: Except displacement transducers
2: Without averaging
Electrical Supply
Voltage Range 100-240Vac
Frequency 50/60Hz
Current: 2 A
Fuses
Type 5mm x 20mm glass tube fuses
Rating 250VAC , 3.15A , T
Part number GDC-3.15A from Bussmann
Environmental conditions
Altitude 5000 M max
Operating temperature:
0°C to 40°C (32°F to 104°F)
Humidity
80%RH @ 31°C decreasing linearly to 50%RH @ 40°C
Mains supply voltage fluctuation
± 10%
Installation category II
Pollution degree 2
General
Number of channels: 1 to 8
Compatibility
1
: Compatible with all of FISO’s line of fiber-optic transducers
(limited use with FOD sensor)
Sampling rate: 200 kHz
Averaging: 0.005 ms to 100 ms
Precision: 0.3% of full scale
Resolution
2
: 0.1% of full scale
Dynamic range
2
: 3 000 : 1
Data logging: None
Communication: RS-232 communication port for system setup
Analog outputs:
BNC ± 5 Volts
Upgradability – firmware: Flash ROM Upgradable
Upgradability – channels: Plug-in modules from 1 to 8 channels for one chassis
Weight: Chassis: 7.5 Kg
Channel module: 0.5 Kg
Enclosure dimensions (WxDxH): 450 x 360 x 132.5 mm