User guide

Veloce 50 Operating Manual

7.2.2 HOW TO CLEAN THE TRANSDUCERS AND CONDITIONER CONNECTORS

Transducer connector

STEP 1 STEP 2

FISO Technologies recommends cleaning the

connector via the use of FISO Fiber Optic

Connector Cleaner. To do so, ensure a new

cleaning surface by advancing cloth tape. Tear of

excess tape as required.

Softly press connector and expose it to the cloth

with motion illustrated in above figure. Up to 6

connectors may be cleaned before advancing

tape.

Conditioner internal connector

STEP 1

STEP 2

Provided in the cleaning kit, swab sticks are

required to insure a proper cleaning technique.

Please do not use cotton swabs. Swabs sticks are

available at most electronic store. Take a swab

and pour a few drops of isopropanol

on it (avoid

acetone).

While rotating, smoothly

insert the swab in the

internal connector of your conditioner. Then rotate

the swab in order to swamp the entire internal

connector surface. Repeat step #1-2, 3 times and

always use new swabs sticks. To preven

scratches on the connector, always use soft tip

swab stick