User guide

Veloce 50 Operating Manual
6
3.2 COOLING AND INSTALLATION
The Veloce SYSTEM is cooled by forced convection. Two exhaust fans located on the rear panel allow
ambient air to flow outside the chassis of the instrument. The ambient air is drawn inside the casing from
the ventilation louvers located on the bottom cover to the fans.
CAUTION: The Veloce System chassis must be installed in area where ambient
temperature does not exceed 40°C. Enough space must be allowed for exhaust fans
and ventilation louvers so they are not obstructed and sufficient ventilation is
provided. Operating the instrument with improper cooling may cause damage to the
instrument, possibly voiding the warranty.