User manual

T [phone] - 1 866 650-6555 F [phone]
[e-mail]
14
helio C2
10.6.4 Replacing Armrest Pad
• Remove screws (1) located under pad (through the tube).
• Replace with new armrest pad.
• Reinstall screws (1) and tighten firmly.
10.6.5 Installing the Swing-away Armrest
receiver
• Remove the two bolts (1).
• Align the armrest receiver with the mounting holes of the
frame and of the transit securement anchor.
• Reinstall the bolts and tighten firmly.
10.6.6 Adjusting Swing-away Armrest height
• Pull the armrest out of the receiver (1).
• Remove screws (2).
• Inside the armrest tube, slide the dowel nut with a long
screwdriver at the desired height (3)
• Reinstall screws (2).
• Reinsert armrest in receiver.
10.7 Front riggings
10.7.1 Adjusting Footrest length
• Loosen screw (1).
• Slide the extension tube inside the front rigging at the desired
length.
• Tighten screw (1) firmly.