User manual

T [phone] - 1 866 650-6555 F [phone]
[e-mail]
10
helio C2
9.3 Front Riggings
9.3.1 Installing
• Insert the front rigging pivot into the wheelchair’s mounting
tube.
• Rotate the assembly toward the front until the mechanism
locks into place.
• Repeat the same steps for the other side.
9.3.2 Uninstalling
• Push the release locking lever (1) inward our outward and
maintain that position so the front riggings can rotate freely.
• Rotate front riggings outwards or inwards to disengage the
locking mechanism.
• Lift the assembly up so as to disconnect it from the
wheelchair’s frame.
• Repeat this procedure for the other side.
9.4 Footrest
• When transferring, avoid putting weight on the footrest and be
careful not to stand behind the footrest.
• Never use footplates to lift the wheelchair.
• Only use non-detachable parts to lift the wheelchair.
9.5 Armrests
Ensure that armrests are securely locked into arm
sockets and armrest release buttons are locked into
place prior to using the wheelchair.
• Never lift the wheelchair by holding the armrests.
• Use only non-detachable parts for lifting.
9.5.1 Flip-back armrests
To lift the armrests:
• Pull lever (1) upwards to release the system.
• Rotate the armrest all the way up and down.
To reinstall the armrests in closed position:
• Rotate the armrests downward until the front slide plate
enters in the armrest receiver and snaps into place.
• Make sure the locking lever is engaged to avoid any
movement.
9.5.2 Removable T armrests
To remove the armrests:
• Pull lever (1) upwards to release the system.
• Pull the armrest all the way up.
To reinstall the armrests:
• Bring the armrests downward until the slide (3) enters in the
armrest receiver (not pictured in diagram) and snaps into
place.
• Make sure locking lever (2) is engaged to avoid any
movement.