User’s Guide Motion C5v Motion F5v
© 2010 Motion Computing, Inc. All rights reserved. This document contains information protected by copyright. No part of this document may be reproduced in any form without written consent from Motion. The information in this document is provided “as is” and is subject to change without notice. Motion is not liable for errors or omissions in this document. Motion, Motion Computing, Speak Anywhere, and View Anywhere are trademarks or registered trademarks of Motion Computing, Inc. in the U.S.A.
Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Finding information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the RFID reader (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Using the cameras (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using the web camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using the documentation camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4 Care and Maintenance . . . . . . . . . . . . . . . . . . .51 General care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Standard display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 View Anywhere display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi Contents
Getting Started 1 The Motion® C5v and Motion F5v are portable, semi-rugged pen-based computers designed for health care, manufacturing, utilities, warehousing, field service workers, or anyone else that needs the mobility and flexibility of a tablet computer. The C5v and F5v integrate traditional computer features with digital ink, data capture, and speech recognition.
Overview The following illustrations show the features of the system. Front Function button Dashboard button Directional pad Battery gauge B button A button Microphones Web camera Docking connector 2 Function button Activate secondary functions for other buttons (page 8). Dashboard button Open Motion Dashboard (page 8). Directional pad Use for basic navigation. Equivalent to the arrow keys on a keyboard. The center button is equivalent to Enter (page 8). A button Set up a custom action (page 8).
Right side Power button Windows Security button Power adapter port, USB port (F5v), and cover RFID antenna area Camera button Fingerprint reader Bar code scanner Power adapter port, USB port (F5v only), and cover Connect the power adapter (page 17). F5v only: Connect accessories requiring a USB port. RFID (optional) antenna area Scan area for reading RFID tags (page 14). Camera (optional) button Use to trigger the built-in documentation camera (page 12).
Back Pen tether Pen holder Fan cover Camera light Speaker Camera lens Battery Battery latch 0560 Hot-swap logo 4 Docking guide Smart card reader Pen tether Attach the pen tether. Pen holder Store the pen when not in use (page 10). Fan cover Protects the fan assembly. Camera (optional) lens Capture images to the hard disk drive (page 12). Camera (optional) light Provides light for the documentation camera (page 12). Speaker Listen to audio (page 15).
Setting up the system The tablet is self-contained, so you can start using it immediately. If you are using a Docking Station, refer to the instructions that came with the docking station. Use the following steps to get started. For safety information, see the Safety and Regulatory Guide packaged with the system. Step 1: Plug in the power adapter • Plug the power cord into the power adapter and the tablet, then plug the power cord into an outlet.
Step 3: Calibrate the digitizer With tablet PCs, you will frequently use a pen instead of a mouse and keyboard to interact with the computer. Use the pen to move the pointer around the screen, and tap the screen to click. Use Tablet PC Input Panel to enter text (page 22). The digitizer detects the position of the pen on the screen. You should calibrate the digitizer the first time you start the system, and again whenever the pointer does not align with the pen tip. To calibrate the digitizer 1.
Features 2 Motion Computing tablet PCs provide the power and features of a traditional computer, while giving you the added mobility and versatility of a portable computer. Use the information in this chapter to get more familiar with the hardware features of the system, such as the buttons, camera, RFID reader, bar code scanner, and wireless adapters.
Front panel buttons You can use the buttons on the front of the unit to perform many functions without having to use the pen. The buttons are customizable, so you can modify their functions to suit the way you work. See “Configuring front panel buttons” on page 24.
Battery gauge You can use the battery gauge on the front of the unit to monitor the status of the battery. The following illustration shows the battery gauge. A B When the tablet is running on the battery, the battery gauge shows the current level of charge. Status Description Four green LED lights The battery is three-fourths to fully charged. Three green LED lights The battery is one-half to three-fourths charged. Two green LED lights The battery is one-fourth to one-half charged.
Pen An important difference between traditional PCs and tablet PCs is that you frequently use a pen instead of a mouse and keyboard to interact with the computer. The pen includes a pressure-sensitive tip, a function button, and an eraser. The pen contains no batteries and requires no external power. Eraser Function button Tip For information about using the pen, see “Using the pen” on page 21. Display The system includes a 10.
The optional Computrace®Complete solution offers Computer Theft Recovery, Data Protection, Secure Asset Tracking and a Recovery Guarantee. Windows Security button You can use the Windows Security button to log on to or lock the system. Pressing the Windows Security button is equivalent to pressing Ctrl+Alt+Del on a keyboard. A B Fingerprint reader Using the fingerprint reader, you can log on to the system by scanning your fingerprint instead of entering a password.
Cameras (optional) Your tablet may include both a built-in web camera and documentation camera. Web camera The web camera is a 1.3-megapixel camera that supports color images and streaming video. It is located on the front of your tablet. You can use the web camera for interacting with people online. For information on using the web camera, see “Using the web camera” on page 28. Documentation camera You can use the documentation camera to take pictures and save them to the hard disk drive.
Bar code scanner (optional) The system is available with an optional integrated 1D and 2D bar code scanner that you can use to retrieve information from bar codes. A bar code is a series of shapes on a contrasting background that can be optically read by a bar code scanner. Bar codes can be used for asset tracking, identification, process control, health care and pharmaceutical applications.
RFID reader (optional) Your system may include an integrated 13.56 MHz RFID (Radio Frequency Identification) reader that you can use to retrieve information from RFID tags. RFID tags use radio frequency (RF) transmissions to identify a product, animal, or person. RFID does not require direct contact or line-of-sight scanning, and can be scanned through many materials, including clothing. An RFID tag can store much more data than a typical bar code, and some RFID tags can both transmit and record data.
Speaker The system includes a sealed speaker that can be used for audio warnings or confirmation, dictation, videos, or other multimedia applications. Docking connector The docking connector is used to attach the unit to a docking station. When the unit is docked, you can use the ports on the docking station to connect a monitor, keyboard, mouse, or other external USB devices. For more information about the Docking Station and other accessories, go to the Motion Computing accessories page at www.
Mobile Broadband with GPS (optional) Your tablet may have an embedded Qualcomm® Gobi2000™ module. The Gobi™ module lets you connect to a variety of mobile broadband networks for sending and receiving data wirelessly. It also includes a global positioning system (GPS) receiver. Mobile Broadband By using mobile broadband, you can browse the Internet, send and receive email, connect to your company’s intranet, and use Web-based applications.
Battery The system includes a high-capacity Lithium-ion battery that fits in to the back of the unit. Under normal conditions, you can run the system on battery power for about three hours. You can maximize battery life by optimizing your power scheme. See “Using power management” on page 36. For information about charging and checking battery status, see “Using the battery” on page 32. DANGER: To avoid personal injury, handle the battery with care.
18 Chapter 2 Features
Using the System 3 The Motion® C5v and Motion F5v run Microsoft Windows® 7, which includes ink-to-text and handwriting recognition, voice recognition, and security features to help defend against viruses, worms, and other threats. And unlike PDAs or other handheld devices, the C5v and F5v run any Windows 7-compatible application.
Using Motion Dashboard Motion Dashboard puts many common settings and tasks at your fingertips. For example, you can enable or disable Bluetooth and Wi-Fi, calibrate the digitizer, or check the remaining battery power. To start Motion Dashboard • Press the Dashboard button ( ) on the front of the unit. To open a category, tap the appropriate icon on the left side. When you change a setting on Motion Dashboard, the change occurs immediately. You do not need to tap Apply or OK.
Using the Motion utility in the notification area Click the Motion utility icon ( need to click the up arrow ( ) in the notification area ( ) to view the icon. ). You may You can access the following features from the Motion utility icon: • Battery Health Selecting this option opens a window that shows information about correct battery conditioning to prolong the life of the battery and shows the current battery charge level. • Motion Dashboard Selecting this option opens the Motion Dashboard.
Store the pen in the pen holder when not in use. To put the pen in the pen holder, press it until it clicks into place. To remove the pen, press down on one end, grab the other end, and remove from the holder. For information about replacing pen tips, see “Replacing pen tips” on page 55. Important: The system responds to the Motion pen only. Do not use a traditional pen, pencil, or stylus with the system.
Configuring pen options You can use pen options to enable or disable the pen function button and the pen eraser. To configure pen options 1. Open Motion Dashboard to the Pen & Tablet panel (page 20). 2. Tap the Pen & Input Devices button. 3. In the Pen and Touch window, tap the Pen Options tab. 4. For Pen buttons, do one of the following: • To enable the function button, select Use pen button as a right-click equivalent. • To enable the eraser, select Use the top of the pen to erase ink.
Configuring front panel buttons As you become more familiar with your system, you may want to customize the buttons on the front panel. You can configure the buttons to start your favorite program, run a command, or enter a key combination. A B Function Dashboard Directional pad A button Enter B button To configure the front panel buttons 1. Open Motion Dashboard to the Pen & Tablet panel (page 20). 2. Tap the Tablet PC Settings button. 3. In the Tablet PC Settings window, tap the Buttons tab. 4.
Using the display Use the information in this section to customize your display settings. You can adjust the brightness level, rotate the display, and change the order in which the display rotates. Adjusting the display brightness Use this procedure to change the brightness of the display. To adjust the display brightness 1. Open Motion Dashboard to the Display panel (page 20). 2. Set the Brightness slider to the desired level.
Using the bar code scanner You can use the built-in bar code scanner to retrieve information from bar codes. For more information about the bar code scanner, see “Bar code scanner (optional)” on page 13. To use the bar code scanner 1. Open the application that you want to receive the bar code data and place the insertion point in the appropriate field. 2. Hold the unit by the handle with the scanner lens in front of you. 3. Aim the scanner lens at the bar code. 4.
Using the RFID reader (optional) Your tablet may include a built-in RFID reader. You can use the RFID reader to retrieve information from RFID tags. For more information about the RFID reader, see “RFID reader (optional)” on page 14. To use the RFID reader 1. Hold the unit by the handle with the right edge in front of you. 2. Aim the right edge of the unit at the RFID tag. Ensure that the tag is 1–1.5 inches (25–40 mm) from the RFID antenna scan area. RFID tag 1 – 1.5 inches 3.
Using the cameras (optional) Your tablet may include the built-in web and documentation cameras. Using the web camera You can use the built-in web camera to interact with people online. Use the software of your choosing to operate the web camera. For more information about the web camera, see “Cameras (optional)” on page 12. Using the documentation camera You can use the built-in documentation camera to take pictures and save them to your hard drive.
Using the smart card reader (optional) Some tablets contain the optional smart card reader. Using smart card software, this device reads information from the smart card when the card is inserted into the reader. Depending on the smart card software you are using: • You may receive an acknowledgement for when the smart card is fully engaged in the reader. • You may receive a prompt or be required to shut down the software before removing the smart card.
Using the built-in microphones You can use the built-in array microphones to record audio, dictate notes, and use voice commands. The two microphones are used at the same time to optimize sound detection for speech recognition and voice recording. You can use the Speak Anywhere acoustics software to fine tune the built-in microphones to suit your environment.
To train your computer to recognize your speech 1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition. 2. Tap Train your computer to better understand you. 3. Follow the instructions in the setup program. To take the speech tutorial 1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition. 2. Tap Take Speech Tutorial. 3. Follow the instructions in the tutorial program. After you have set up speech recognition, you can start it from Control Panel.
Using the battery The system runs on battery power when it is not plugged in. The battery is located on the back of the unit. To maximize the performance of the battery, deplete the battery charge to less than 10% every 30 days. To deplete the battery, use the tablet on battery power without AC power until the battery charge is less than 10%. Checking battery power You can check the remaining battery power from Motion Dashboard, from the battery icon in the notification area, or from the battery itself.
Removing and replacing the battery Before you remove the battery, ensure that the tablet is plugged in, turned off, or in Hibernate (page 37) or Sleep mode (page 36). If you are hot-swapping the battery (page 34), you can do so while the tablet is on and running on battery power. To remove the battery 1. With the back of the unit facing you, slide and hold the battery latch. 2. Insert your finger under the finger grip and remove the battery from the battery compartment. 2 1 To replace the battery 1.
Hot swapping the battery Changing a tablet battery while the tablet is in use and running on battery power is called “hot swapping.” You can hot swap a battery only if you have a second charged battery to replace the battery that is low on power. While hot swapping the battery, you will notice the following behaviors: • The tablet’s display gets dimmer. Once the charged battery is in the tablet, the tablet’s display brightens again. • The battery gauge’s LED lights turn off.
Battery and power management tips • To lengthen the battery’s usable life, use AC power when you can. The battery will charge automatically while you run on AC power, so leave the battery in the unit while you are working. • Use AC power when using a CD or DVD drive. • When running on battery power, place the system in Hibernate (page 37) or Sleep (page 36) mode if you are going to leave it unattended for more than a few minutes.
Using power management Windows 7 includes a comprehensive suite of power management functions that can help you maximize your tablet’s performance or conserve power. To select a power plan 1. Open Motion Dashboard to the Power panel (page 20). 2. For Power Plan, select the appropriate option. For information about creating and using power plans, see the Dashboard Help. For more information about power management settings, open Windows Help and Support and search for “power options”.
Using Hibernate Hibernation is a state in which the computer shuts down to save power but first saves everything in memory on the hard disk. When you restart the computer, your desktop is restored exactly as you left it. Use hibernation to save power when you will be away from the tablet for an extended time. You can put your tablet on Hibernate manually from the Start button, or you can set it up to hibernate when you press the power switch. To set up the power switch to put the computer on Hibernate 1.
Setting up a Wi-Fi connection Use this procedure to create a Wi-Fi connection. To set up a Wi-Fi connection 1. Open the Motion Dashboard to the Wireless panel (page 20). 2. Ensure that Enable Internal 802.11 Wireless is selected. 3. Tap the Properties button. 4. In the Network Connections center, tap the wireless network connection. 5. Tap Connect To, then select a network. If you are connecting to a secure network, you may need to enter authentication information.
Using the SIM card slot The SIM card slot holds one SIM (Subscriber Identity Module) card. A SIM card is a smart card, about the size of a postage stamp, that stores information about your wireless account. You need to use a SIM card only if you are using Mobile Broadband on a GSM/UMTS/HSPA network. Contact your service provider for details. To insert a SIM card 1. Turn off the system and remove the battery (page 33). 2. Locate the SIM slot door and open it.
Using the GPS receiver The Gobi module includes a GPS receiver. The GPS receiver provides the current location, altitude, heading, and horizontal velocity of the tablet through the Connection Manager user interface and through a virtual communications port. You can use the Connection Manager to start, stop, and manage the GPS receiver. See “Using the Connection Manager” on page 40. Note: To use the GPS receiver, you do not need a network connection or an account with a Mobile Broadband network carrier.
Using Bluetooth You can use Bluetooth® to connect to accessory devices or other computers. The devices can communicate with each other when they are in range. For more information, see “Bluetooth wireless” on page 16. Enabling or disabling Bluetooth Before you can set up a Bluetooth device, you must enable the Bluetooth adapter on the tablet. After you enable Bluetooth, the Bluetooth icon ( ) appears in the notification area.
7. Select your Bluetooth device after Windows shows the device, then click Next. 8. Select a pairing option, then click Next. 9. Once the device is added, Windows shows a window confirming that the Bluetooth device has been added. 10. Tap Devices and Printers to verify that the device has been added or click Close to close the window. If the device is not discovered… If the Bluetooth device is not detected after multiple attempts, try the following: • Ensure that Bluetooth is enabled (page 41).
Using Motion OmniPass and the fingerprint reader Motion OmniPass offers a secure and convenient system for managing your passwords and providing confidentiality for your sensitive data. To start Motion OmniPass • In the notification area, double-tap the Motion OmniPass icon ( ). Also, you can start Motion OmniPass from the Security panel of Motion Dashboard. The following illustration shows the Motion OmniPass Control Center.
4. In the Choose Finger window, tap on the finger you want to enroll, then tap Next or Practice. Practice allows you to do a trial run of the fingerprint capture. 5. Place the selected finger over the fingerprint reader and slowly drag your finger across the sensor from right to left or left to right. If the capture is successful, a green fingerprint image will appear in the capture area. If the capture is unsuccessful (red fingerprint image), follow the instructions on the screen to improve the scan.
6. Tap Next, then tap Yes if you want to enroll a second fingerprint (recommended). If you injure a finger, you can use a second finger to authenticate. You can also capture a second fingerprint later. From the OmniPass Control Center, tap Run Enrollment Wizard, then tap Modify a user’s device enrollment. 7. Select I am done with enrolling security authentication devices and tap Next. 8. Select your user preferences and tap Next. On the Backup User Profile screen, tap Backup Now. 9.
Using password replacement OmniPass can manage your passwords for other applications, such as Web sites, Internet email, FTP, or any restricted-access network resource. After OmniPass registers your credentials, you can access any of these restricted areas by using your fingerprint or the master password. To register passwords 1. When you encounter a user name and password prompt, enter your user name and password, but do not log on. (Do not tap Enter, Submit, or OK.) 2.
Logging on to a remembered site To log on to a remembered site, open the Web site or application that you have set up with password replacement. See “Using password replacement” on page 46. Swipe your finger or enter the master password when prompted. To remove a remembered site, tap Manage Passwords. Setting up strong logon security For an additional level of security, you can enable strong logon security.
Using Windows Security Center Windows Security Center provides a central location for you to manage the tablet’s security settings and learn more about improving security. If a problem is detected (such as an outof-date antivirus application), the Security Center sends you an alert and provides recommendations for how to remedy the situation. To learn more, open Motion Dashboard to the Security panel, then tap Windows Security Center.
Setting up users and passwords You can use different types of user accounts and passwords to create various levels of protection for computer and its data, depending on the level of security that you need. Setting up Windows user accounts You can use Windows user accounts to help secure the files on the tablet from other users. You must have an administrator account on the tablet to add a new user to the tablet. To set up a Windows user account 1.
Setting up a hard disk drive password You can use a hard disk drive password to protect the tablet and the hard disk drive. The tablet cannot be started without the HDD password, and the data on the disk drive cannot be accessed, even if it is removed and attached to a different computer. To set up an HDD password 1. Start the system (page 5). 2. When the Motion Computing splash screen appears, tap the screen with the pen. On the TrustedCore menu, tap Launch System Setup.
Care and Maintenance 4 Proper care and maintenance will keep your tablet PC working and in good condition for a long time. This chapter describes the care and maintenance procedures for the system. For general information about care of the tablet PC and its components and accessories, see the Safety and Regulatory Guide packaged with the system. WARNING: Follow the guidelines listed below when maintaining the tablet PC and its components.
Standard display • Clean fingerprints and most marks from the display surface by wiping it with the soft cloth (provided). Do not pour liquids directly onto the display surface itself. Do not use an abrasive cleaner on the display. If liquid is spilled on the display, wipe it up immediately. For more information, see “Cleaning in a health care environment” on page 53. • Avoid using tissues or paper towels to clean the display surface. These contain wood fibers that can scratch the display.
Cleaning in a health care environment This section describes the cleaning procedures for the tablet PC in a health care environment. Disinfecting procedures You should periodically disinfect the system according to the institutional polices of surface and equipment safety and cleanliness. Motion has tested a variety of antimicrobial solvents and information on specific products is available upon request.
Cleaning solutions Motion Computing maintains a list of tested cleaning solutions and chemical disinfectants on the Motion Computing web site. To access the list, follow the instructions provided below for your tablet PC. For the C5v 1. Go to http://www.motioncomputing.com/products/tablet_pc_c5.asp. 2. Click the standard cleansers link. For the F5v 1. Go to http://www.motioncomputing.com/products/tablet_pc_f5.asp. 2. Click the standard cleansers link.
Pen • Store the pen in the pen holder or in a case when not in use. • Do not store the pen vertically on the tip. Constant pressure on the tip can affect the pen-to-digitizer interaction. • Change the pen tip regularly. See “Replacing pen tips” on page 55. • Do not immerse the pen in liquid. It contains electronic components that could be damaged. • In certain environments, particles or debris can stick to the pen tip or the display.
Traveling with the system Use the following tips when you travel with the system. • Remove all accessories and cables. Remember to pack those you will need while traveling, including at least one pen. • Put the unit into a case to protect the display. • Protect the pen by keeping it in the pen holder or in a case during travel. • Pack the unit securely in a briefcase or hand-carried luggage, and keep it separate from toiletries, liquids, and food. Do not pack it in checked luggage.
Creating a backup archive If you want to roll back your tablet to a predetermined state, you can create a backup archive. To create a complete PC backup archive 1. From the Control Panel, tap the System and Security category, then tap Backup and Restore. 2. Tap Create a system image in the left navigation bar, then follow the instructions. Note: You will need an external USB hard disk drive or DVD drive attached to store the backup copy. To back up individual files 1.
To restore from your complete PC backup archive 1. After the initial BIOS screen, press and hold the F8 key. 2. On the Advanced Boot Options screen, select Repair your computer and press the Enter key. 3. Select a keyboard layout and click Next. 4. Select a user name and enter the password, and then click OK. 5. Attach the USB hard disk drive or DVD drive that you used to store your complete PC backup archive. 6. On the System Recovery Options menu, click System Image Recovery. 7.
Troubleshooting and Support A Motion Computing products are thoroughly tested for performance and quality, but occasionally problems still occur. If you do not find the information you are looking for in this section, go to the Motion Computing support page at www.motioncomputing.com/support. Troubleshooting Use the information in this section to identify and resolve common issues. If an issue has more than one potential cause, the most common cause is listed first.
3. Press the camera, Windows Security, and dashboard buttons, simultaneously. For the locations of these button, see below. Dashboard button A B Windows Security button Camera button The tablet will not enter Hibernation mode. • Hibernation might not be enabled. Use Motion Dashboard to enable Hibernation. See “Using Hibernate” on page 37. The tablet does not return from Hibernation while on battery power • The battery might be depleted. Plug the unit in to AC power.
Display The display is too dim • The brightness may be set too low. Use Motion Dashboard to increase the brightness. See “Adjusting the display brightness” on page 25. The desktop area is larger than the display • The display resolution may be set higher than the native resolution of the LCD display. In this case, the desktop area scrolls as you move around. Use Windows Display Properties to decrease the display resolution to 1024 × 768 pixels.
The eraser does not work • The eraser may not be enabled. You can use Tablet and Pen Settings window to enable the eraser. See “Configuring pen options” on page 23. The eraser works on digital ink only, not text. The buttons on the unit do not do what I expect them to do • The button functions may have been customized. You can use the Tablet and Pen Settings window to change the buttons to the desired functions. See “Configuring front panel buttons” on page 24.
An application has stopped responding, but I can still move the pointer and use other applications • Use Task Manager to manually stop the application. For more information, open Windows Help and Support and search for “task manager”. The computer seems to be operating more slowly than usual • The hard disk drive may be full or nearly full. You can use Disk Cleanup to free up space on the hard drive. For more information, open Windows Help and Support and search for “disk cleanup”.
Will scratches affect the performance of the display or digitizer? • Our testing has not found appreciable loss of performance on a scratched display. How sensitive is the screen to various elements? • As with any computer or electronic device, you should protect it from liquids, dirt and sand, other contaminants, and extreme heat. Will any monitor, USB device, keyboard, or mouse work with the system? • If the device has a driver for Windows, it will work with the system.
Warranty and insurance programs Motion Computing currently provides limited warranties on Motion products and accessories. See the Warranty packaged with your Motion product or accessory or visit our Web site at www.motioncomputing.com. In addition, Motion Computing offers extended warranties along with various screen and configuration insurance programs. Go to the Motion Computing Support and Services page at www.motioncomputing.com/products/services_top.asp.
66 Appendix A Troubleshooting and Support
Index Numerics C 802.
digitizer pen about 21 calibrating 6 directional pad 2, 8 disabling the eraser 23 the pen button 23 display about 10 brightness 25 features 10 rotating 25 rotation sequence 25 using 25 disposing of used batteries 35 docking connector 15 document, about 1 dynamic brightness 25 E enabling 802.
microphones about 14 using 30 mini-plug 17 Motion Dashboard using 20 Motion Dashboard button 8 N network profiles 40 definition 40 networking Bluetooth 16 wireless 15 O OmniPass about 11, 43 starting 43 on-screen keyboard 22 ordering replacement pens 55 overview hardware 7 ports and connectors 2 P Page Down 8 Page Up 8 password replacement about 46 using 46, 47 pen about 21 actions 21 calibrating 6 care and maintenance 55 configuring options 23 plug 17 plugging in 5 portrait mode 25 power adapter about 1
troubleshooting battery 60 display 61 input 61 network 62 system 62 Trusted Platform Module 10 turning on the unit 5 U USB port 3 using 802.