Use and Care Manual

INITIALIZING SYSTEM & SETTING HEIGHT POSITIONS
Before your first time to use the desk, please use the Height
Controller to initialize the desk.
Press and hold the UP and DOWN arrows simultaneously for 6 seconds
number 38 (+/-0.2) appears on the display. Your desk is now ready to use.
Pre-set Table Heights
SAFETY FEATURE
Hold "M" and "UP" buttons for 4 seconds to lock all buttons, the
following code “LOC” will be displayed on the control panel screen.
Hold "M" and "DOWN" buttons for 5 seconds to unlock all buttons.
If the system STOPS working and shows “HOT” on the screen. This means the
few minutes and let it
cool down to 25ºC this will solve the problem.
Page 10
USB Charging Port:
5V/2.4 Amp