Instruction Manual

ManualsBrandsMotion Computing ManualsLaptopM1300

Chapter

Motion Tablet PC Hardware

Motion Computing Tablet PC User Guide 15

FRONT PANEL

BUTTONS

The front panel of the Motion Tablet PC contains six buttons, shown in

Table 2-2. Most of these buttons have both primary and secondary functions.

In addition, some may be re-programmed for other functions.

MODEM

AND LAN

CONNECTORS

The Motion Tablet PC modem and LAN (network connection)

communication ports are found on the connector edge, as shown below.

Modem and LAN Connectors: (1) RJ-45 LEDs; (2) RJ-11

Modem; (3) RJ-45 LAN

NOTE: The Motion FlexDock has no built-in modem port. When using a

FlexDock, you must connect to the modem port on the Tablet PCs through the

FlexDock opening designed for this purpose.

• Modem (RJ-11 port) — Built-in, V.90 modem that operates at a

maximum of 56.6K throughput and has fax capabilities; port supports

a standard phone cord connector; connect the modem only to an

analog telephone jack, not to a digital telephone (PBX) network jack

• Ethernet LAN (RJ-45) — Connects a network, cable modem, or

xDSL; contains two status LEDs

CAUTION: Do not plug a standard RJ-11 phone cord into the RJ-45

port or you may damage the RJ-45 LAN port.

Table 2-2

Default Button Functions

Button Primary Function

Secondary Function

(Press Function + this button)

Escape

Same as keyboard Esc key Equivalent to Alt + Tab

Function

Function + other button

activates secondary function

None

Five-way

Directional Control

Button

Works like the arrow keys

on a keyboard. The center

of the button works like the

Enter key.

Left arrow = Shift+Tab

Right arrow = Tab

Up arrow = Page Up

Down arrow = Page Down

Hot Key #1

1 & 2

Opens the Motion Dashboard. Opens the Windows Journal.

Hot Key #2

1 & 2

Rotates the display. Opens the Tablet PC Input Panel.

Security

Opens the Windows Task

Manager (Ctrl + Alt + Del). Also

used for domain authentication

or logon screen.

None

NOTE:

Primary function programmable.

Secondary function programmable.

Not programmable. For information about programming buttons, see Chapter 4.