Instruction Manual

Chapter 2 Using your J3600 Using the fingerprint reader 58
You can also use the fingerprint reader as a scrolling device or to move the cursor on the
screen.
N
OTE: The scroll and cursor navigation functions are disabled while scanning a fingerprint.
To configure the fingerprint reader as a scrolling device:
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tab the Navigation Settings button.
The TruePrint Sensor Properties window opens.
4. Select the Scroll Nav option and adjust the sliders for Motion Sensitivity, Tap Sensitivity,
and Repeat Delay, or you can use the default settings.
5. Tap OK.