Instruction Manual

Chapter 2 Using your J3600 Using the battery 53
Removing and replacing the J3600 battery
You can remove the battery to check the remaining power or replace it with a fully charged
battery.
To remove the battery:
1. Ensure that the Tablet PC is plugged into AC power or turned off.
2. Turn the Tablet PC over so that the back side is up.
3. Slide the battery release switch until the battery is partially ejected, and then pull the
battery out of the battery bay.
battery release switches
To replace the battery:
• Place the two tabs of the battery into the two slots in the battery bay, and then press the
other end of the battery into the battery bay until you hear a click or feel the battery lock
into place.
battery release switch (left battery)
battery release switch (right battery)