Instruction Manual

Chapter 2 Using your J3500 Setting display options 45
Extended with monitor primary display theme
Display resolution
You can change the display resolution of the external monitor or projector if you are using
either extended scheme. However, when you are using the Mirror display scheme, the
display resolution of the external monitor or projector is limited to the display resolution of
the tablet PC.
The J3500 12.1” WXGA display has a resolution of 1280x800.
Connecting to an external monitor
To connect an external monitor to the J3500, you use the J-Series FlexDock, which is sold
separately.
To set up an external monitor
1. Connect the monitor cable from the external monitor into the docking station.
2. Plug in the external monitor and turn it on.
3. If necessary, install software and drivers for the monitor. See the manufacturer’s
documentation for more information.
4. Open
Motion Dashboard.
5. Tap Display.
6. Select a Display Scheme.
7. If you purchased your tablet PC with a touch display but it does not respond to touch,
follow the steps to enable touch on the correct display.
tablet PC external monitor