Operation Manual

32 Chapter 2 Using your J3500 Using the camera (optional)
Using the camera (optional)
Your J3500 may be equipped with a built-in 3.0 MP auto-focus camera with an illumination
light. The JPEG format camera has a maximum resolution of 2048x1536 pixels, which
supports taking photos and capturing video.
The rear-facing camera can work with any application that uses a camera. The Motion
QuickNav application that comes with the J3500 is one way you can use the camera.
The J3500 camera lens is located on the back on the tablet. To take a photo, you can press
the camera button located on the front of the camera. As an alternative, you can take a
photo directly from your photo application.
For details on using QuickNav as your photo application, see “Taking photos with Motion
QuickNav” on page 36.
J3500 camera
Camera tips
• Hold the camera steady and allow it to focus.
• If your pen is tethered, ensure that the tether is not in front of the camera lens.
• Ensure you have adequate lighting.
• You can use the Pictures window to take and review multiple pictures. Use the slider bar
at the bottom of the Pictures window to switch among active pictures.
camera button
camera lens
camera light