Operation Manual

Chapter 1 Getting Started Where to begin with your J3500 11
Set up mobile broadband with GPS
If you purchased your J3500 with the optional mobile broadband module, you can connect
to high-speed cellular networks worldwide. With the mobile broadband module and a data
plan from one of several cellular network providers, you have full Internet access.
The mobile broadband module includes a GPS receiver which provides the current location
of this tablet PC. With the GPS receiver, you can use most GPS navigation and mapping
applications. You use the Motion Connection Manager to manage your mobile broadband
and GPS network connections.
To set up mobile broadband
1. Enable mobile broadband from the Motion Dashboard.
2. Start the Motion Connection Manager. From the Start menu, select All Programs >
Motion Computing > Motion CM.
3. Tap the help icon and select the help topic, Setting up mobile broadband.
4. Follow the instructions to set up a network profile and connect to the mobile broadband
network.
N
OTE: Before you can connect to a mobile broadband network, you must have an active account
with a cellular network provider. Some providers require a SIM card for mobile broadband
access; if you are not sure whether you need one, contact your mobile broadband provider.
Set up Bluetooth
Your J3500 may be equipped with the optional built-in Bluetooth adapter which provides
short-range wireless connectivity with other Bluetooth enabled devices.
To set up Bluetooth
1. Enable Bluetooth from the Motion Dashboard.
2. Add a Bluetooth device:
a. From the notification area, tap the Bluetooth icon and select Add a Device.
b. Make sure the device is discoverable according to Bluetooth device manufacturer’s
instructions. When a Bluetooth device is discoverable, it is visible to other Bluetooth
devices within range.
c. Select the desired Bluetooth device from the list of available devices.
d. Follow the on-screen instructions to complete the procedure.
3. Make the J3500 discoverable (visible) to other Bluetooth devices:
a. From the notification area, tap the Bluetooth icon and select Open settings.
b. On the Options tab, select Allow Bluetooth devices to find this computer.