Getting Started Guide

5 C5te/F5te Getting StartedModel CFT-003
Set up wireless
The C5te/F5te comes with built-in Wi-Fi® and Bluetooth®. Your
tablet PC may also be equipped with mobile broadband for
accessing the Internet. To set up available wireless networks,
follow these steps:
Step 1. Enable wireless devices from PC settings
1. From the Charms menu, tap Settings, then tap Change PC
settings.
2. Tap Wireless.
3. Tap the device bar to turn on all wireless devices you want to
use:
Tip If mobile broadband is not listed, your C5te/F5te isn’t
congured with a mobile broadband module.
Step 2. Set up Wi-Fi
1. From the Settings menu, tap the wireless network icon .
2. Select a wireless network from the list of available networks.
Step 3. Set up Mobile Broadband with GPS (optional)
If you purchased your C5te/F5te with the optional mobile
broadband module, you can connect to high-speed cellular
networks worldwide. With the mobile broadband module
and a data plan from a cellular network provider, you have full
Internet access.
NoTe: Before you can connect to a mobile broadband
network, you must have an active account
with a cellular network provider. Some providers
require a SIM card for mobile broadband
access. If you aren’t sure whether you need
one, contact your mobile broadband provider.
To set up mobile broadband:
1. From the Settings menu, tap the wireless network icon .
2. Select a mobile broadband network from the list of available
networks.
If you purchased the optional mobile broadband module,
your tablet PC has GPS capabilities. You can use GPS with
your preferred mapping applications to nd your current
and destination locations.
If you purchased the optional discrete GPS module, GPS is
enabled by default. Please refer to the User’s Guide for
additional information.
Step 4. Set up Bluetooth
The C5te/F5te has a built-in Bluetooth® 4.0 adapter to
connect to other Bluetooth-enabled devices.
To add a Bluetooth device:
1. In the Search eld, type Bluetooth and select the Settings
category. Tap Add Bluetooth device.
2. Make sure the Bluetooth device is discoverable according
to the device manufacturer’s instructions. When a Bluetooth
device is discoverable, it’s visible to other Bluetooth devices
within range.
3. Select the desired Bluetooth device from the list of devices.
4. Follow the on-screen instructions.
Tip To make the C5te/F5te visible to other devices, tap
the Change Bluetooth settings from the Search
area. On the Options tab, select Allow Bluetooth
devices to connect to this computer.