User's Guide

Chapter 2 Using your CL920 Using Integrated u-blox 7-based augmented GPS 42
N
OTE: To reduce power consumption when running only on battery power and when 4G LTE
Mobile Broadband with GNSS isn’t being used, disable Mobile Broadband in Motion
Dashboard.
To enable Mobile Broadband:
1. Open Motion Dashboard and tap Power.
2. Tap the switch beside Mobile Broadband to turn it on.
Using Integrated u-blox 7-based augmented GPS
The GPS with SBAS receiver uses satellites to provide the current location, altitude, heading,
and horizontal velocity of the tablet through a virtual communications port. The module
supports the Wide Area Augmentation System (WAAS) for improved accuracy in the United
States; European Geostationary Navigation Overlay Service (EGNOS) for improved accuracy
in Europe; and Multi-functional Satellite Augmentation System (MSAS) for improved
accuracy in Japan. The proper Augmentation system will be detected based on your
location. No special selection is required. The augmentation feature uses signals from
geostationary satellites to improve on the reliability and accuracy of the signals from the
GPS satellites. There is no user interface for the GPS with SBAS receiver and the GPS with
SBAS receiver is always on whenever the tablet is powered on. The virtual communications
port that is assigned to the GPS with SBAS receiver by Windows can be viewed in the
Control Panel System Device Manager.
N
OTE: To use the GPS with SBAS receiver, you don’t need a network connection or an account with
a Mobile Broadband network carrier or service provider.
Using Bluetooth
Your CL920 has a built-in Bluetooth adapter to connect to other Bluetooth-enabled devices.
To add a Bluetooth device:
1. From the Windows notification area, tap the Bluetooth icon and select Add a Device.
2. Make sure the Bluetooth device is discoverable according to the device manufacturer’s
instructions. When a Bluetooth device is discoverable, it’s visible to other Bluetooth
devices within range.
3. Select the desired Bluetooth device from the list of devices.
4. Follow the on-screen instructions.