User's Guide

Chapter 2 Using your CL920 Using 4G LTE mobile broadband with GNSS 41
Changing how the power button functions
When you press and release the power button, it can go into one of the following modes:
• Sleep—The tablet pauses all activity immediately and quickly resumes when awakened.
This saves power when you are away from your tablet for a short time. However, you will
lose unsaved data if there’s a power failure.
• Hibernate—The tablet saves the contents of memory to the storage drive and shuts
down. Pressing the power button restores the desktop exactly as you left it. Hibernate
consumes less power than Sleep mode and takes less time to restart than the Shut down
option.
• Shut down—Tablet shuts down. Pressing the power button reboots the tablet.
By default, the tablet goes to sleep when you press and release the power button. To wake
up your tablet, press and release the power button again. You can put the tablet in
Hibernate mode or shut it down completely from the Start menu.
You can change how the power button behaves when it is pressed either to hibernate or to
shut down the tablet. You can set the behavior individually—depending on whether the
tablet is running on battery or plugged in.
To change what happens when the power button is pressed:
1. Open Motion Dashboard.
2. Tap Power.
3. Under Power Switch on battery, select what you want to happen when the power
switch is pressed while the tablet is running on battery.
4. Under Power Switch plugged in, select what you want to happen when the power
switch is pressed while the tablet is plugged into an outlet.
Using 4G LTE mobile broadband with GNSS
Your Tablet PC may be equipped with an optional embedded 4G LTE mobile broadband
with GNSS module. Mobile Broadband access requires an account with a Mobile Broadband
network carrier. To use the GNSS receiver, you don’t need a network connection or an
account with a Mobile Broadband network carrier.
Enabling 4G LTE Mobile Broadband with GNSS
Before you can establish a Mobile Broadband connection or use the Mobile Broadband
GNSS receiver, you must ensure that Mobile Broadband is enabled in Motion Dashboard.