C5m/F5m Tablet PC Model CFT-004 User’s Guide
© 2015 Motion Computing, Inc. All rights reserved. This document contains information protected by copyright. No part of this document may be reproduced in any form without written consent from Motion. authorized by Macrovision. Reverse engineering or disassembly is prohibited. The information in this document is provided “as is” and is subject to change without notice. Motion is not liable for errors or omissions in this document. Motion Computing, Inc.
Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Optional features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Mobile broadband with GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Discrete GPS with WAAS, EGNOS, and MSAS (optional) . . . . . . . . . . . . . . . . . . . . . . . . 7 Security . . . . . . . . . . . . . . . . . .
Using handwriting recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Using the front panel buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Configuring front panel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Connect an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disinfecting procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Training and documentation considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Cleaning the fingerprint reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Caring for the tablet battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started 1 The Motion® C5m/F5m Tablet PCs are rugged, powerful, and provide robust computing power and a variety of integrated features to enable any mobile workflow. The C5m/F5m Tablet PCs include these features: • Intel® Core™ i3, i5, or i7 vPro™ Processors (i7 Processor includes Intel vPro™ technology) • Windows® 7 Professional 64-bit (available through downgrade rights from Windows 8.1 Pro) • DDR3L 1600MHz SDRAM memory • • • • • • • • m.2 Solid State Drive (SSD) USB 3.
Optional features This section describes the optional features available when you purchase your C5m/F5m. Mobile broadband with GPS You can purchase a C5m/F5m Tablet PC with an optional embedded mobile broadband module that enables you to connect to a variety of mobile broadband networks for sending and receiving data wirelessly. You can typically use mobile broadband anywhere you can use your mobile phone.
TPM With the built-in TPM and Infineon Security Platform Tools, you can create and manage digital certificates, user and device authentication, full disk data encryption, and restricted network access. These features are most commonly used by enterprises and enabled by the system administrator. To download and install TPM, go to go to http:// www.motioncomputing.com/us/support/downloads, select your Tablet PC model and operating system, and then tap Show Results.
Other optional features Other C5m/F5m optional features include: • Web and documentation cameras—See Using the cameras on page 32. • Barcode scanner—See Using the barcode scanner on page 37. • Smart card reader—See Using the smart card reader (optional) on page 51. Overview of the C5m/F5m The following illustrations show the features available on the C5m/F5m Tablet PC. Top side Volume buttons Fan cover Volume buttons Adjust the volume up or down. Fan cover Protects the fan assembly.
Right side Security button USB 3.0 port Power adapter port Fingerprint reader Windows® button Power button Barcode scanner (optional) USB 3.0 port Connects to a USB device. Power adapter port Connects to the power adapter. Windows® button Opens the Windows Start menu. Security button Use to log on to or lock the tablet. Equivalent to Ctrl+Alt+Del on a keyboard. Fingerprint reader Scan your fingerprints for added security. Power button Turns the tablet on and off.
Front Web camera indicator light Web camera Microphones Function button Motion Dashboard button Enter button Directional pad Battery gauge A button B button Touchscreen display Docking connector Web camera indicator light (optional) Indicates that the optional web camera is active. Web camera (optional) Use for web-based video communication. Microphones Records sounds and used for speech recognition. Function button Activates secondary functions for other buttons.
Back Pen tether attach point Fan cover Pen bay Rear camera light Rear camera Speaker Battery Battery gauge light Battery gauge button Battery door latch SIM card slot (located in battery bay) Docking guide Smart card reader (optional) Pen tether attach point Attach the pen tether. Pen bay Use to store the pen when not in use. Fan cover Protects the fan assembly. Rear camera light (optional) Provides light for the documentation camera.
Battery door latch Opens the battery compartment’s door. Docking guide Aligns the unit with the docking station (sold separately). SIM card slot Micro-3FF SIM card slot (must remove battery) Smart card reader (optional) Reads information on a smart card. Pen The C5m/F5m Tablet PC supports 10-point capacitive multi-touch with your fingers as well as input with a digitizer pen. You may find the pen handy when you want to write a quick email or take notes.
4. Press and release the power button to turn it on. located on the top right side of the C5m/F5m NOTE: You don’t have to wait until the Tablet PC is fully charged before using it. However, it’s recommended that you keep the power adapter plugged into an outlet so your C5m/F5m can continue charging. 5. Follow the on-screen instructions to set up your user account and activate Windows. Step 2: Connect to a wireless network The C5m/F5m includes built-in Wi-Fi® and Bluetooth®.
NOTE: Before you can connect to a mobile broadband network, you must have an active account with a cellular network provider. Some providers require a SIM card for mobile broadband access. 1. With the Tablet PC powered off, insert the SIM card and then power the tablet on. Enable mobile broadband: 1. Start Skylight. From the Start menu, select All Programs > Sierra Wireless > Skylight > Skylight. 2. Tap the connect button to connect to your wireless networks. 3.
Sleep mode Place your tablet in Sleep mode when you go away for a short period of time. Sleep mode conserves battery power while you’re away and when you return, your desktop is the same as you left it. Sleep mode is sometimes called “standby.” To put the tablet in Sleep mode: • Save your files. • Press and release the power button . Note: While in Sleep mode, the power button flashes green. To wake up the tablet from Sleep mode: • Press and release the power button .
Attach the pen tether The C5m/F5m pen comes with a tether so that you can attach the pen to your tablet to prevent misplacing it. To attach the pen tether: 1. Slip one end of the tether through the hole at the end of the pen, then pull the pen through the loop until it’s tight. 2. Slip the other end of the tether through the attach point on the C5m/F5m, then pull the pen through the loop until it’s tight. You can purchase additional pens from the Motion Computing Accessories page.
NOTE: If you don’t have access to a particular feature or setting on your Tablet PC, contact your system administrator for additional information. You will find other useful information on our website: • Motion Computing Support • Free online training videos • Knowledge Base • Motion Computing Accessories • Motion Computing Store NOTE: This guide is available in French, German, Spanish and Portuguese on our website.
Using your C5m/F5m 2 This chapter provides information about performing the following tasks: • Using Using Motion Dashboard on page 20 • Using Accessing Motion tools from the Windows notification area on page 21 • Using touch on page 22 • Entering text and handwriting recognition on page 27 • Using the front panel buttons on page 30 • Connect an external monitor on page 31 • Using the built-in microphones on page 32 • Using the cameras on page 32 • Using the barcode scanner on page 37 • Using the battery
Motion Computing applications Your C5m/F5m includes some Motion Computing applications that will help you configure your Tablet PC to fit your needs, manage common Windows® settings, and access resources for additional information: Motion Dashboard Motion application for changing tablet settings. Motion Getting Started Document that contains tips for starting out with the C5m/F5m Tablet PC. SnapWorks™ by Motion® Application that enables you to shoot, save, edit, email, print, and copy your photos.
Motion Dashboard is organized into categories, which are listed on the left of the Dashboard. Tap a category to display its settings. NOTE: This is a partial list of tasks that you can perform with Motion Dashboard. Some of these tasks are described in this chapter; all tasks are described in Motion Dashboard by tapping the help icon .
Tap the Motion icon to display: • Battery Health—Shows the current battery charge level • Motion Dashboard—Opens the Motion Dashboard • Options—Lists options you can set: – Show Hard Drive Activity—When selected, the Motion icon blinks when there is hard drive activity. – Automatic Display Rotation—When selected, the C5m/F5m automatically changes the viewing orientation (landscape to portrait or vice versa) when the tablet is physically rotated.
Calibrate touch The digitizer is an application that detects the position of the pen or your finger on the touchscreen display. You should calibrate the digitizer the first time you start your Tablet PC. Then, you can recalibrate the digitizer whenever the pointer doesn’t align with the pen tip or finger. To calibrate the digitizer: 1. Open Motion Dashboard. 2. Tap Pen & Tablet. 3. Under Pen & Tablet, tap Calibrate Digitizer. 4. Tap the Calibrate button in the Display tab. 5.
3. Tap Touch Settings. 4. In the Digitizer Options tab in the Input Mode section, tap the desired mode. Touch settings You can use Motion Dashboard’s Touch Settings to enable or disable touch, select rightclick options when using touch, and to calibrate the digitizer for touch. The digitizer detects the position of your finger on the touchscreen display. You should calibrate the digitizer the first time you start your Tablet PC.
5. To enable Touch, tap Use your finger as an input device. 6. To enable multi-touch gestures, tap Enable multi-touch gestures and inking. 7. To adjust the double-tap action, under Touch action, tap Double-tap then tap Settings. Move the slider to make your adjustments. 8. To adjust the Press and hold action, under Touch action, tap Press and hold then tap Settings. Move the slider to make your adjustments. 9. To display the touch pointer on the screen, tap Show the touch pointer. 10.
Adjusting Tablet PC settings From Tablet PC Settings, you can change from right-handed to left-handed use. To change hand orientation: 1. Open Motion Dashboard. 2. Tap Pen & Tablet. 3. Tap Tablet PC Settings. 4. Tap the Other tab and make your desired change. The Tablet PC Settings Display tab has a Calibrate option. You can use this feature to calibrate your Tablet PC screen for pen or touch input.
8. Follow the on-screen instructions. Press Esc to end the process. Entering text and handwriting recognition You can enter text either by writing on a virtual note pad (called the writing pad) or by tapping characters on the on-screen keyboard. keyboard icon writing pad icon video demonstrations of writing tips writing pad TIP: Tap the icons at the top of the input panel to view videos on making editing gestures. To hide the video tips, tap the icon on the right.
Opening and closing the input panel The tablet PC input panel often opens automatically when you tap in a text field. You can also tap the tab located on the left side of the screen to expand the input panel. To open the input panel, either: • Tap at the place you want to enter text, such as in a text box. Then tap the input panel icon . • Tap the input panel tab on the left edge of the screen . To close the input panel • Tap the close button at the top right.
Entering special keys with the extended keyboard You can enter special keys using the on-screen expanded keyboard. Special keys include: • Home, End, and Insert keys • PgUp and PgDn keys • PrtScn key • Pause key • ScrLck key To open the expanded keyboard: • Tap the Tools key at the top of the input panel and choose Show Expanded Keyboard. tools special keys Using handwriting recognition Handwriting recognition is enabled by default.
TIP: If you inherit your C5m/F5m from another user, you can reset automatic learning. To reset handwriting automatic learning: 1. Tap the Windows Start button. 2. In the search box, type personalize handwriting recognition. 3. In the list of results, tap Personalize handwriting recognition. 4. Tap Change automatic learning settings. 5. Select Don’t use automatic learning, and delete any previously collected data.
The directional pad orientation rotates to match the display orientation. To move the pointer in a certain direction, press that direction on the pad regardless of orientation. For example, “up” in landscape orientation becomes “left” in portrait orientation. Configuring front panel buttons As you become more familiar with your tablet, you can customize the buttons on the front panel. You can configure the buttons to start your favorite program, run a command, or enter a key combination.
Using the built-in microphones You can use the built-in array microphones to record audio, dictate notes, and use voice commands. The two microphones are used at the same time to optimize sound detection for speech recognition and voice recording. Using the cameras Your C5m/F5m may include built-in web and documentation cameras. Using the web camera The web camera is a 2MP camera that supports color images and streaming video. It’s located on the front of your tablet.
SnapWorks™ by Motion® The C5m/F5m includes an application called SnapWorks™ that enables you to shoot, save, edit, email, print, and copy your photos. Taking a photo with SnapWorks 1. Tap the camera icon on the Windows taskbar to activate Motion SnapWorks. 2. Point your camera at the subject you want to photograph. You can use the grid and center circle to help you line up your subject(s). 3. Tap the camera icon take a picture.
Setting Description Camera Resolution Change the resolution of your photos—High = 2048 × 1536 pixels; Med = 1024 x 768 pixels; Low = 640 x 480 pixels (Note: These resolution values apply to the documentation camera only.) Image Storage Specify the location where your photos are stored. Default Saved Image Type Use to select the image format you want to use for your photos. GPS Stamp Visible Tap On to include a GPS location stamp on your photo. You can see the GPS stamp when you view your photo.
TIP: Tap the Left Arrow icon to return to the previous screen. Tap the Close icon to exit SnapWorks. SnapWorks help Tap the Help icon to open the Key screen where you can view all SnapWorks™ icon descriptions. Editing a photo in SnapWorks 1. Tap the Gallery icon in the upper left-hand corner of the screen to open the directory where your photos are stored. You’ll see the most recent photos you have taken. 2. Double-tap the photo you want to edit.
5. When you’re finished editing your photo, tap the Camera icon in the upper left- hand corner of the screen to return to the camera screen. Sending, printing, and copying your photos 1. To send your photo via email, tap the Gallery icon in the upper left-hand corner of the screen to open the directory where your photos are stored. 2. Tap your photo once to select it, then tap the Send icon . You’ll see a pop-up window that tells you to choose a method to send your image. 3.
Using the barcode scanner Your C5m/F5m is available with an optional integrated 1D and 2D barcode scanner that you can use to retrieve information from barcodes. Many applications use barcodes for asset tracking, identification, and process controls. Supported barcode types The C5m/F5m barcode scanner supports several different types of barcodes—a minimum set of barcodes is enabled at the factory.
If the scan was successful, the data will appear in the application and you will hear a chime sound as confirmation. Barcode scanner tips • You will typically get the best scans if the lens is six to seven inches from the barcode. • If you’re having trouble scanning a barcode, use two hands to steady the tablet while you scan. Using the battery The C5m/F5m includes a high-capacity Lithium-ion battery that fits into the back of the unit.
The battery gauge is located on the front of the C5m/F5m Tablet PC as shown: You can use the battery gauge on the front of the unit to monitor the status of the battery. Battery gauge When the tablet is plugged in, the lights on the gauge indicate the battery’s current level of charge—from one amber light (less than 25% charged) to four green lights (between 75% and 100% charged). To check the remaining battery power while running on battery power: 1. Locate the battery gauge on the front of the tablet.
The indicator lights show the remaining charge. Each light represents about 25% of the total charge. Press Removing and replacing the battery Before you remove the battery, ensure that the tablet is plugged in, turned off, or in Hibernate (page 16) or Sleep mode (page 16). If you’re hot-swapping the battery (page 40), you can do so while the tablet is on and running on battery power. To remove the battery: 1. With the back of the unit facing you, slide and hold the battery latch. 2.
While hot-swapping the battery, you will notice the following behaviors: • The tablet’s display gets dimmer. Once the charged battery is in the tablet, the tablet’s display brightens again. • The battery gauge’s LED lights turn off. Once the charged battery is in the tablet, the LED lights turn on again. • The power button is disabled. (The power button is disabled at any time the tablet has no battery and is not running on AC power through the power adapter.
Battery and power management tips • To lengthen the battery’s usable life, use AC power when you can. The battery charges automatically when the tablet runs on AC power. • For optimal battery life, use AC power when using a USB device such as a DVD player or external hard disk drive. • When running on battery power, place the tablet in Hibernate or Sleep mode if you’re going to leave it unattended for more than a few minutes.
Changing how the power button functions When you press and release the power button, it can go into one of the following modes: • Sleep—The tablet pauses all activity immediately and quickly resumes when awakened. This saves power when you are away from your tablet for a short time. However, you will lose unsaved data if there’s a power failure. • Hibernate—The tablet saves the contents of memory to the storage drive and shuts down. Pressing the power button restores the desktop exactly as you left it.
Enabling Mobile Broadband with GNSS You can purchase a C5m/F5m Tablet PC with an optional embedded mobile broadband module that enables you to connect to a variety of mobile broadband networks for sending and receiving data wirelessly. You can typically use mobile broadband anywhere you can use your mobile phone. The mobile broadband module includes Global Navigation Satellite System (GNSS) support.
b. Supported International service providers: Vodafone, Telefonica, Orange, Telstra, Swisscom. For all other service providers, select Generic. 8. Tap Apply. 9. Wait for the Configuring mobile broadband device status window to complete with Success. This may take a few minutes. 10.Tap Options. 11.Configure your desired Profile options. 12.Tap OK. 13.Shut down the tablet to insert the SIM card: a. Start > Shut down Insert SIM card: 1. With the Tablet PC powered off, locate the SIM card slot.
Using the discrete GPS receiver with WAAS, EGNOS, and MSAS The discrete GPS receiver uses satellites to provide the current location, altitude, heading, and horizontal velocity of the tablet through Windows' Sensor Framework and a virtual communications port. There is no user interface for the discrete GPS receiver. The discrete GPS receiver is always on whenever the tablet is powered on.
Using the fingerprint reader You can use the fingerprint reader to log on to the tablet by scanning your fingerprint instead of entering a password. This feature provides another level of security for the tablet. Scan fingerprint Fingerprint reader If you use the fingerprint reader, you can avoid having to enter passwords for your applications and websites.
When you start the application for the first time, the Motion OmniPass application looks like this: After you’ve enrolled as an OmniPass user, the application opens the OmniPass Control Center.
Create an OmniPass user account You can enroll as a new OmniPass user to register your fingerprint. Before you begin, read the following tips. Fingerprint reader tips • For best results, use the Practice option to familiarize yourself with the fingerprint reader before enrolling the first time. • Be consistent. Hold your finger and scan at the same angle each time. For example, if you enroll your finger with your hand open, hold your hand this way each time you scan. • The scanner is bi-directional.
Replace your passwords Once you’ve enrolled in OmniPass, you can use your OmniPass credentials instead of your password to log on to your accounts that require passwords. This is called password replacement. You set up password replacement the next time you’re prompted for a password. Instead of entering the password, you register your OmniPass credentials. To register OmniPass credentials: 1. Open OmniPass. 2. Tap the Password Wizard link in the left pane and follow the instructions.
3. Follow the on-screen instructions. 4. After you have enabled encryption, reboot your Tablet PC, and manually restart SecureDoc to complete the encryption process. For more information about WinMagic SecureDoc, go to http://www.winmagic.com/ products/full-disk-encryption-for-windows. Using the smart card reader (optional) Your tablet may include the optional smart card reader located on the back of the tablet next to the battery.
2. Slide the smart card into the smart card reader until the card is firmly seated in the reader. To remove the smart card: 1. Depending on your smart card software, you may be required to shut down the smart card software first before removing the card. With this type of software, removing the smart card while the tablet is running can result in logging off or shutting down the tablet. 2. Pull the card straight out of the reader.
4. Slide the SIM card into the SIM card slot until it clicks into place. You may need to use a paper clip to push the SIM card all the way in. To remove a SIM card: 1. Turn off the tablet and remove the battery (page 40). 2. Open the SIM card slot door. 3. Press the card in slightly until it pops out. You may need to use a paper clip to push the SIM card in to release it.
Backing up your system To protect against loss or accidental deletion, schedule backups to occur automatically on a regular basis. Windows 7 has a backup tool that you can use to set up what you want to backup and schedule backups on a regular basis. To schedule backups: 1. From the Control Panel, tap System and Security category then tap Back up your computer. 2. Tap Set up backup. Follow the on-screen instructions. You can restore files from a backup.
For complete instructions, open Windows Help and search for “Back up your programs, system settings, and files.” Restoring your system image from Windows Control Panel Use the Recovery tool from the Control Panel to restore your system if you can still access Windows 7 or if you are restoring your system image onto a different computer. To restore your system from Windows Control Panel: 1. Locate the external drive that contains your system image. 2.
Restoring your system without a system image If you need to restore your Windows 7 system and you do not have a system image, you can restore Windows to its original factory image. This does not restore any of your files or any programs that you have installed. To reinstall the original factory image: 1. Ensure that a keyboard is attached to the tablet. 2. Press the tablet’s power button to start the tablet. 3. Press and hold the F8 key to display the Windows Advanced Boot Options screen.
Caring for your C5m/F5m 3 Proper care and maintenance will keep your C5m/F5m Tablet PC working and in good condition. For general information about care of the tablet and its components and accessories, see the Safety and Regulatory Guide included with your Tablet PC. WARNING: Follow the guidelines listed below when caring for your C5m/F5m Tablet PC and its components. Improper use may damage the Tablet PC and its components and void the warranty.
Caring for the display Follow these suggestions to keep your display clean: • Clean fingerprints and smudges from the display surface by wiping it with the cloth provided. • If needed, use a cleaning solution recommended by Motion Computing to clean the display. Spray the solution on a cloth then wipe the display. Never spray directly onto the display surface and never use an abrasive cleaner. • If liquid is spilled on the display, wipe it up immediately with a soft cloth.
Replacing pen tips Pen tips eventually wear down or get damaged, so the pen includes extra tips and a tool for replacing them. With typical use, you should change the pen tip every 90 days. If you use the pen in a dirty or dusty environment, you should change the pen tip every 30 days. Particles can become embedded in the pen tip and scratch the display. To replace the pen tip: 1. Grasp the old tip with the replacement tool. Use the notch on the ring to grab the tip. 2. Pull the old tip out of the pen. 3.
If the tablet is used with patients who are infected or colonized with vancomycin-resistant enterococci or other drug-resistant microorganisms judged by the infection control program (based on current state, regional, or national recommendations, to be of special or clinical or epidemiologic significance or with highly virulent microorganisms such as Ebola or Lassa), then the unit should be dedicated to one patient or patient cohort or subjected to low-level cleaning between patient uses.
Caring for the tablet battery To maximize the performance of the battery, condition the battery once a month. To condition it, run the tablet on battery power until the battery’s charge level drops below 20%. Then use AC power until it is fully charged. You will receive a message if the tablet detects that the battery needs conditioning. For more information about batteries, see Using the battery on page 38.
Troubleshooting and FAQs 4 Motion Computing Tablet PCs are thoroughly tested for performance and quality, but occasionally issues can still occur. If you don’t find the information you’re looking for in this section, go to Motion Computing Support. NOTE: Enterprise users should contact their support organization for assistance with resolving tablet, application, or connectivity issues. Troubleshooting Use the information in this section to identify and resolve common issues.
The tablet doesn’t return from Hibernation mode while on battery power • The battery might be depleted. Plug the Tablet PC’s power adapter into an AC outlet and into the Tablet PC. The power button is blinking but nothing is happening • The tablet is in Sleep mode. Press the power button to wake up the tablet. To power off the tablet completely, you can press and hold the power button for about five seconds. However, this is not recommended.
and Sound category. Under Display, change the resolution until the display appears normally. • The display driver may have been removed or become corrupted. Use Windows Device Manager to reinstall the driver. For more information, open Windows Help and Support and search for “update driver.” To update the display device driver: 1. Make sure that the tablet is connected to a network. 2. In Control Panel, tap the System and Security category. 3. Select System. 4. Under System, select Device Manager. 5.
On-screen instructions require me to press Enter or Esc, but I don’t have a keyboard • Connect a keyboard to the tablet to continue. The C5m/F5m responds to my finger but not my pen • The tablet may be configured to ignore pen input. To check, open Motion Dashboard then tap Pen & Tablet. Tap Touch Settings and tap the Digitizer Options tab. Set Input mode to the recognize both touch and pen.
Wi-Fi issues I can’t connect to a Wi-Fi network • Your C5m/F5m may not have located a Wi-Fi network. From the Start menu, tap Control Panel then Network and Internet. View your active networks. If no network is connected, tap Connect to a network and select a network from the list. • Your Tablet PC may be too far from the wireless router or access point. Move your tablet closer to the router or access point. • Wi-Fi must be enabled from Motion Dashboard.
Bluetooth wireless tips Motion Computing and its Bluetooth partners have worked to ensure a positive experience with this technology and to ensure Bluetooth interoperability. In doing so, we have found the following issues: • Interference—If you’re running Bluetooth and Wi-Fi at the same time, interference can affect the Bluetooth performance.
Audio issues No sound is coming from the built-in speakers • The volume may be set too low or muted. Tap the volume icon in the Windows notification area in the taskbar and adjust the slider to raise the volume. No sound is coming from the built-in speakers or external speakers • The integrated audio components may have been overwritten. If you install a third-party audio device (such as a USB or Bluetooth device), the integrated audio may stop working. If this happens, reinstall the audio drivers.
Frequently asked questions How can I make the battery charge last longer? • By default, the power plan for the C5m/F5m is a balance between optimal performance and a long battery charge. If you want the tablet to run longer between charges, use the Power saver power plan. Open Motion Dashboard, tap Power. Tap Power Options and select Power saver. • Use the Dynamic display setting. This automatically controls the display to conserve power. Open Motion Dashboard, tap Display then tap Dynamic.
through the Micro-HDMI port. For a list of products that have been tested for Windows, look for the Windows Marketplace Tested Products page on the Microsoft® website. How do I adjust the Tablet PC for left-handed use? • From the Motion Dashboard, tap Pen and Tablet, then Tablet PC Settings, then the Other tab. You can select left- or right-handed, which changes the location of the menus.
Index A C A button 11 Absolute Computrace® 8 amber light 69 amber lights 39 audio drivers 68 settings 21 automatic display rotation 22 C5m/F5m getting started 13 optional features 7 optional setup tasks 16 overview 9 specifications 6 calibrate 26 calibrating the digitizer 23 calibrating the pen 23 camera documentation 12 help 35 settings 33 cameras 32 care and maintenance display 58 fingerprint reader 60 general care 57 pen 58 replacing pen tips 59 checking battery status 38 cleaning display 58 fingerpr
directional pad 11, 30 discrete GPS with WAAS, EGNOS, and MSAS 7 display automatic display rotation 22, 70 care and cleaning 58 connecting external 17 orientation 70 scratch resistance 6 scratches 69 touch with multiple 26 troubleshooting 63–64 turning off automatic rotation 70 disposing of used batteries 41 docking connector 11 docking guide 13 docking input panel on the screen 28 docking station 17 documentation camera 32 double-tap 22, 23, 25 downloads, free 56 E End key 29 Enter button 11 Esc button co
mobile broadband with GNSS configuring 44 enabling 44 troubleshooting 67 using 43 mobile broadband with GNSS (optional) set up 14 monitors touch input 26 Motion Computing Support 62 Motion Dashboard 20, 22 button 11, 30 opening 20 touch settings 24 Motion Optimized power plan 42 Motion utilities 21 multi-touch gestures 24, 25 N notification area 21 numbers pad 28 O OmniPass create a user account 49 enroll as a new OmniPass user 49 set up a fingerprint password 47 starting 47 online tutorials 70 optimizati
shortcut menu 22 shut down 43, 63 SIM card slot 13, 52 Skype™ 32 sleep 16 about 43 Sleep mode 16 smart card reader (optional) 13, 51 SnapWorks™ by Motion® 33 configuring settings 33 copying a photo 36 editing a photo 35 help 35 printing a photo 36 sending a photo 36 taking a photo 33 software solutions 56 spatial tolerance 25 speaker 12, 21 specifications 6 status light 39 swapping batteries 40 system image 54 creating 16 T Tab key 30 Tablet & Pen Settings 31 tablet PC managing with Motion Dashboard 20 onl
wireless enable 14 wireless network connect to 14 Index Z zoom in and out 22 75
