User's Manual

Using the RFID Reader

To use the RFID reader

1. Hold the C5 by the handle with the right edge in front of you.

2. Aim the right edge of the C5 at the RFID tag. Ensure that the tag

is less than 2 inches

from the RFID antenna scan area.

3. Press and release the RFID button on the top of the C5. The RFID

light will come on to indicate that the unit is scanning.

The RFID light goes off and the unit beeps to indicate a

successful scan. The ASCII and Hex data appears in the RFID

Tag Data window.

Note: RFID tags are typically used with specialized

applications.

Page 23 of 29