User's Manual

Using the Camera

The camera lens light is on the back of the C5 and

there is a light source just above it.

Please note that the first time you use the bar camera, it will

take about 5-10 seconds for the software to open and then

the camera will activate. You will see the following dialog

box.

Subsequent scans will not have the delay for the

software to open unless the computer is restarted.

1. Press the Camera button to activate the camera and open the viewfinder.

2. Press the Camera button again to take a picture.

3. In the Pictures dialog box, do one of the following:

• To save the picture, tap Save. In the Save As dialog box,

specify a location in which to save the picture.

• To delete the picture, tap Delete. In the confirmation

dialog box, tap OK.

Tips

• If you are using a tethered pen make sure the tether is not in front of the lens

• Hold the camera steady and allow it to focus

• Make sure you have adequate lighting

Page 22 of 29