User's Manual

When the battery discharges to 10% a pop up balloon “low battery message” appears unless you are

running in a Citrix environment. Ask your IT department if you are not sure if your organization uses

Citrix. At 10% power, the battery LED slow blinks amber. If you ignore or do not see the warning, then

when the Standard Battery reaches 3%, battery LED fast blinks amber and the system enters Hibernation

mode

• When you try to reboot or power on the tablet the green power LED will flash momentarily but the

C5 will not reboot.

• Attach the tablet to AC and power on

• Tablet resumes from hibernate mode

• A low power message may still be present

• Tap on the x to close it

Best Practices: Extending Battery Life

• Place your tablet in standby or hibernate mode when not using it during your work day

• Charge your tablet using AC power cord or docking station

• Fully charge your battery overnight

• Reboot at least once a week

Removing and replacing the battery

Before you remove the battery, ensure that the C5 is

plugged in, turned off, or in Hibernate or Standby

mode.

To remove the battery

1. With the back of the unit facing you, slide and hold

the battery latch.

2. Insert your finger under the finger grip and remove

the battery from the battery compartment.

Hands on exercise:

Practice removing and inserting the battery

Page 19 of 29