Instruction Manual

Software Setup
09
Moticon SCIENCE Mobile App
The Moticon SCIENCE Mobile App is available for Android only! For more information, refer
to the system requirements on www.moticon.de/support#faq.
1. Send the email address linked to your Google account to [e-mail]. Moticon will register
this email address for the closed Moticon SCIENCE user group.
2. In Google Play Store, search for "Moticon SCIENCE" and install the mobile app on your phone or tablet.
3. When you launch the mobile app, grant the following permissions:
Bluetooth service
Location service
You need an active email address linked to a Google account to activate the mobile app.
Moticon SCIENCE Desktop Software
The Moticon SCIENCE Desktop Software is available for Windows 10 (or higher) only! Refer to
the system requirements for more information on www.moticon.de/support#faq.
4. Download and install the desktop software on your computer using the access/license credentials
indicated on the software deployment document attached to your product shipment.
Network Setup
You need to connect both your phone/tablet and your computer to the same local network.
For troubleshooting, go to
www.moticon.de/support#sw-setup.
5. Connect your phone/tablet and your computer to the same local network (options: local WiFi, wireless
access point, hotspot initiated by computer).
6. Find the IP (IPv4) address of your computer (e.g. '192.168.?.???') in the system network/internet settings.
7. In the Moticon SCIENCE Mobile App, go to the 'Settings' section, enter the IP address of your computer.
8. Press the confirm button and check that the notification indicates a successful network connection.
Moticon SCIENCE Insole Instruction Manual 03.00.00