Instruction Manual

In the following, the terms "sensor insole" and "product" refers to an individual left / right
Moticon SCIENCE Sensor Insole, as well as to a pair of sensor insoles.
Intended Use
Intended Use
Measurements may be incorrect when the product is used outside of the defined
intended use.
Professional use only.
Always keep the product and the coin cell batteries away from children to prevent
swallowing.
The sensor insole is inteded to be used inside a shoe for measuring the plantar pressure
distribution at the sole of foot, and the acceleration in three aces and rotation of the foot
in three axes.
This product is not a medical product. It is the responsibility of the user to interpret the
measurement data obtained from the product, and no diagnosis or treatment decision may
be carried out soley on the basis of the data obtained from the sensor insole.
Contraindications
The following conditions are absolute contraindiciations for using the product:
- open wounds of the foot, irritated or otherwise unhealthy foot skin
- orthopedic or other reasons depending on the health status of the wearer, which do not
allow for waring the sensor insole
- severe gait impairments where the sensor insole might increase the risk of fall
- inability of the wearer to wear closed shoes for wearing the sensor insoles
When applying the sensor insole to a wearer for more than one day , the user applying the
product to the wearer must ensure that the wearer will not encounter negative orthopedic
long-term effects from wearing the product, and must instruct the wearer to report discomfort
and pain due to wearing the device, and to stop wearing the sensor insole in such case.
05
Moticon SCIENCE Instruction Manual 03.00.00