Instruction Manual

Refer to the corresponding video tutorials and documentation on www.moticon.de/support about how
to carry out the below procedures.
Refer to the sensor insole setup instructions (P12) for how to get ready for data acquisition.
Handling Instructions
Do not bend or twist the middle part of the sensor insole when putting it into or taking it out
from a shoe.
1. If the shoe has a removable inlay or liner,
remove it before inserting the sensor insole.
4. Ensure flush rest in the shoe without bended
edges or gaps, otherwhise select proper size
2. When sliding the sensor insole into the shoe, pay
attention not to bend the mid foot area
3. Push heel area down to ensure sensor
insole sits completely in the shoe
5. To remove the sensor insole, slightly lift
sensor insole in medial mid foot area with fingers
6. Pull on the heel area to remove sensor insole
from shoe, do not bend in mid foot area
Wireless connections are potentially unstable. When starting a recording, check in the Moticon
SCIENCE Mobile App that the recording has started before letting the wearer walk away.
1 3
4
5
2
6
15
Moticon SCIENCE Insole Instruction Manual 03.00.00