Instruction Manual

Analyze
Report
Record
Analyze
20
1x 00:00:12:
21
Tree
/
190626_18:41:44
19
Analyze
Report
Record
Record
17
18. Press transfer button for transferring
measurement to SCIENCE Desktop Software
18
Measurements
Unnamed measurement
23.07.2019 19:33:47 (0:00:01)
16
15
13
14
12
11
11. After returning, wait for reconnect
and press "STOP" to stop the measurement
15. Go to "Measurements" section
16. Wait for sync and check measurement
19. Wait until transfer and decoding is finished,
measurement appears in measurement tree
12. Remove sensor insoles from the shoes 13. Remove the battery lid
14. Remove coin cell batteries and attach battery lid
17. Put SCIENCE Desktop Software in
"Record" screen to wait for incoming data
20. Switch to "Analyze" section
21. Replay or analyze measurement data
Troubleshooting
FAQ
www.moticon.de/support
If you encounter technical problems during
data acquisitions, visit our support pages
14
Data Acquisition Procedure
Moticon SCIENCE Insole Instruction Manual 03.00.00